Package: blkreplay Version: 1.0-11.1 Architecture: amd64 Maintainer: Andrew Shadura Installed-Size: 2698 Depends: libc6 (>= 2.17) Recommends: blkreplay-examples Homepage: http://blkreplay.org Priority: extra Section: utils Filename: pool/tools/b/blkreplay/blkreplay_1.0-11.1_amd64.deb Size: 2621666 SHA256: ad6e3ff9ec936340665d9e49970fd7bf9fa6aaf8c353382e95822c953739a9a1 SHA1: 1532b7f815534975bd639aafe98ba7dff081b956 MD5sum: c92d76086d24a82e266ed3da8d97b849 Description: block device testing and benchmarking toolkit blkreplay is a utility driving the block layer of the operating system while measuring latency and throughput of I/O operations for later visualisation. . blkreplay can create artificial loads (random read-write sweeps, various kinds of overload tests) or replay natural loads which have been recorded by blktrace or a similar utility run at production servers. . blkreplay can be used to test physical hardware, to compare different brands of hard disks or RAID controllers, to evaluate the effect of SSD caching, to compare different block level transports like iSCSI vs Fibrechannel and so on. Package: blkreplay-dbgsym Source: blkreplay Version: 1.0-11.1 Architecture: amd64 Maintainer: Andrew Shadura Installed-Size: 68 Depends: blkreplay (= 1.0-11.1) Homepage: http://blkreplay.org Priority: extra Section: debug Filename: pool/tools/b/blkreplay/blkreplay-dbgsym_1.0-11.1_amd64.deb Size: 38160 SHA256: e8df53902beafb6a946695e35b5eb02da5a9af24be1076312d431cc1b8109756 SHA1: 91a25188fa97ce04a04054a03182e0c55fa8f07f MD5sum: b06f22e2380f878f93855f93278a6b0f Description: Debug symbols for blkreplay Auto-Built-Package: debug-symbols Build-Ids: 3ed15147f0c0efccab71929ff84b9ac69a7b4d92 7af2fbd04fab01b99f421edba58e051fc3c66afb c8f5d9a0be5af81d22330742f469f1a191a3eacb Package: blkreplay-examples Source: blkreplay Version: 1.0-11.1 Architecture: all Maintainer: Andrew Shadura Installed-Size: 21427 Depends: blkreplay Homepage: http://blkreplay.org Priority: extra Section: utils Filename: pool/tools/b/blkreplay/blkreplay-examples_1.0-11.1_all.deb Size: 21165868 SHA256: 4bf8888362e0c2a616a3c812a9a720d74f46df5af54b694263b9e68a0d0d2e5e SHA1: 2fdc7a0eb7d7c0c2b81c5bb7ab1f86cbf7896d04 MD5sum: d057d4d308c9f5d31fe5bb4711e07a5b Description: block device testing and benchmarking toolkit (examples) blkreplay is a utility driving the block layer of the operating system while measuring latency and throughput of I/O operations for later visualisation. . blkreplay can create artificial loads (random read-write sweeps, various kinds of overload tests) or replay natural loads which have been recorded by blktrace or a similar utility run at production servers. . blkreplay can be used to test physical hardware, to compare different brands of hard disks or RAID controllers, to evaluate the effect of SSD caching, to compare different block level transports like iSCSI vs Fibrechannel and so on. . This package contains example configuration files and example loads, artifician and natural. Package: cmocka-doc Source: cmocka Version: 1.0.1-3stretch.1 Architecture: all Maintainer: David Prévot Installed-Size: 555 Depends: libjs-jquery Homepage: http://cmocka.org/ Priority: extra Section: doc Filename: pool/tools/c/cmocka/cmocka-doc_1.0.1-3stretch.1_all.deb Size: 55442 SHA256: 4d75a42da03c627d1539c57d43509bf4e5d4856886f55195445a49ef6b2174a0 SHA1: 2fa78ba6883590b208e950a42b298ecb9ea54edc MD5sum: e949c1374852b4959993e2a588d7af19 Description: documentation for the CMocka unit testing framework This package contains the documentation and examples for CMocka. . The idea of CMocka is that a test application only requires the standard C library and the CMocka library itself to minimize conflicts with standard C headers especially on a lot of different platforms. . Features: * Easy to use framework to write unit tests * Support for mock objects * Testing of memory leaks, buffer overflows and underflows * Platform and compiler independent Package: collabora-obs-archive-keyring Version: 0.51.1 Architecture: all Maintainer: Jeremy Whiting Installed-Size: 16 Depends: gpgv Recommends: gnupg Priority: extra Section: utils Filename: pool/tools/c/collabora-obs-archive-keyring/collabora-obs-archive-keyring_0.51.1_all.deb Size: 5280 SHA256: 88987e10c5662e2407f019289508175cb941555731b1334a1067a5fac011ed59 SHA1: e0f270a09170ccb4f55e465476012bfd03657a80 MD5sum: 0f3022c95be41484dcb6ea61d3661b29 Description: GnuPG keys for the Collabora OBS repositories and archives This package contains all necessary GnuPG cryptographic keys needed to sign all OBS packages. . These keys allow to ensure the integrity of the binary packages and sources contained in the APT repositories. Package: collabora-themes-obs Version: 21.1 Architecture: all Maintainer: Jeremy Whiting Installed-Size: 27327 Priority: extra Section: devel Filename: pool/tools/c/collabora-themes-obs/collabora-themes-obs_21.1_all.deb Size: 10262144 SHA256: e447ad5e880ea0d92b159fa5608dd56b43a9d5a961fea1d0094464b922b70c6b SHA1: c3681ca9d5ee00e049ef865cf7cce5d042019da1 MD5sum: 164ee1451efed5c55c9dfb55a048a25a Description: Web UI themes for OBS Collabora theme for OBS Package: django-testproject Version: 0.1.2-21.1 Architecture: all Maintainer: Debian LAVA team Installed-Size: 36 Depends: python (<< 2.8), python (>= 2.7), python-django, python:any (>= 2.6.6-7~) Homepage: http://www.linaro.org/engineering/engineering-groups/validation Priority: optional Section: net Filename: pool/tools/d/django-testproject/django-testproject_0.1.2-21.1_all.deb Size: 6328 SHA256: e9d52432efbd85644bda27d76bdf35e12b8b04d0f4b657307725560b2f1da629 SHA1: ecec77ad5723aa4991a81b1f809ed0abc7405aa3 MD5sum: 952765b0e6ab4f726b4d56e7f3792e2c Description: Django test project support This package provides django test project support to make it easier to run application unit tests without testing other parts of django core. . Projects can use run_tests to specify which parts of the codebase listed in INSTALLED_APPLICATIONS will run unit tests. Package: egctl Version: 1.0-11.1 Architecture: amd64 Maintainer: Héctor Orón Martínez Installed-Size: 30 Depends: libc6 (>= 2.14) Homepage: https://github.com/unterwulf/egctl Priority: optional Section: misc Filename: pool/tools/e/egctl/egctl_1.0-11.1_amd64.deb Size: 8678 SHA256: 7e65a9cdcc994eed6a7cf43a1ed5998fbd62cc5fd4bf6d4ad1b6401073f084d2 SHA1: c94d7995b3daf27af13eedadc8bc9fb3cc2fad4a MD5sum: 97718a56bf575018d4fbdc7b71e363bd Description: control state of EnerGenie Programmable surge protector program to control the state of EnerGenie Programmable surge protector with LAN interface. It uses native EG-PMS-LAN data exchange protocol version 2.0 or 2.1, not HTTP. Package: egctl-dbgsym Source: egctl Version: 1.0-11.1 Architecture: amd64 Maintainer: Héctor Orón Martínez Installed-Size: 18 Depends: egctl (= 1.0-11.1) Homepage: https://github.com/unterwulf/egctl Priority: extra Section: debug Filename: pool/tools/e/egctl/egctl-dbgsym_1.0-11.1_amd64.deb Size: 2912 SHA256: 3a16acc2013794cbd4b211ddedae3f7aeb5a4169e19c823306ec5ed730488868 SHA1: 347fdccf6d23b5cdfc4be2a66dbd33967cb1f79f MD5sum: b258abc215322909fdc98084a64a0f42 Description: Debug symbols for egctl Auto-Built-Package: debug-symbols Build-Ids: 8c6e2a201ce3a6d53367101a15356d218e8dfef2 Package: erubis Source: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 19 Depends: ruby-erubis Homepage: http://www.kuwata-lab.com/erubis/ Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-erubis/erubis_2.7.0-21.1_all.deb Size: 10890 SHA256: 225150243f36e771ddde6dff56cfb823dc5b94d55d30e8e4dd8bda3c73503aac SHA1: ad014939931b7813b94b51abaa106f75c4a24b2e MD5sum: fc194e6e0ba9c943df6cb2bcf9e183ca Description: Transitional package for ruby-erubis This is a transitional package to ease upgrades to the ruby-erubis package. It can safely be removed. Package: erubis-doc Source: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 19 Depends: ruby-erubis Homepage: http://www.kuwata-lab.com/erubis/ Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-erubis/erubis-doc_2.7.0-21.1_all.deb Size: 10896 SHA256: 53233180345efa0b3707cf388713285749f56991a162cb4317962dae149e21df SHA1: aaffa28a60ea3c779579b836c17238c608fb5ab8 MD5sum: ee78e725368aed945deda7cb48fe1e34 Description: Transitional package for ruby-erubis This is a transitional package to ease upgrades to the ruby-erubis package. It can safely be removed. Package: ftdi-eeprom Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 46 Depends: libc6 (>= 2.4), libconfuse1 (>= 3.0+dfsg~), libftdi1-2 (>= 1.3), libusb-1.0-0 (>= 2:1.0.8) Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: utils Filename: pool/tools/libf/libftdi1/ftdi-eeprom_1.3-21.1_amd64.deb Size: 17644 SHA256: ad6d100114018048c40e4b9adfcb0ab745969e4f113958055aea05c91fbf9ca0 SHA1: f927423fca20ef4f1f52a51d0a2fd5e26a9df83f MD5sum: 344fc06ddde6aa33d87651eea220bd2a Description: Tool for reading/erasing/flashing FTDI USB chip EEPROMs ftdi-eeprom is a small tool for creating and uploading the configuration EEPROM for the FTDI chip. This eeprom contains information such as vendor and product ID, manufacturer and product strings, revision, etc. Package: ftdi-eeprom-dbgsym Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 30 Depends: ftdi-eeprom (= 1.3-21.1) Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: extra Section: debug Filename: pool/tools/libf/libftdi1/ftdi-eeprom-dbgsym_1.3-21.1_amd64.deb Size: 14660 SHA256: 117e3b97175c666f29e5f4563c7d6e396bf383295738d20f1b938c57eeb43a2c SHA1: 7a3aa70caf8e5b63de7eed728430b2bab69a6b57 MD5sum: 742d3acf917fa3b95aeebc6db8a19b45 Description: Debug symbols for ftdi-eeprom Auto-Built-Package: debug-symbols Build-Ids: 09e15f13fc20dcf76462491fdc61187013c96963 Package: jenkins-job-builder Version: 2.0.0~b2-2stretch.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 16 Depends: python-jenkins-job-builder (= 2.0.0~b2-2stretch.1) | python3-jenkins-job-builder (= 2.0.0~b2-2stretch.1) Homepage: http://ci.openstack.org/jenkins-job-builder Priority: optional Section: python Filename: pool/tools/j/jenkins-job-builder/jenkins-job-builder_2.0.0~b2-2stretch.1_all.deb Size: 5800 SHA256: 2e433121c7c6cd33662b8b193a7daff0d616821fd93a81fdfc01b8c4c3e73ea6 SHA1: ccccc0f9ad9bc5540d2324f6e61c83905e1ca6bb MD5sum: f131bc9dccdfa453b5c8ffdb707e4b22 Description: Configure Jenkins using YAML files - metapackage Jenkins Job Builder takes simple descriptions of Jenkins jobs in YAML format and uses them to configure Jenkins. You can keep your job descriptions in human readable text format in a version control system to make changes and auditing easier. It also has a flexible template system, so creating many similarly configured jobs is easy. . Metapackage to install the Python 2 or 3 version of jenkins-job-builder. Package: jenkins-job-builder-doc Source: jenkins-job-builder Version: 2.0.0~b2-2stretch.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1670 Depends: libjs-sphinxdoc (>= 1.0) Homepage: http://ci.openstack.org/jenkins-job-builder Priority: optional Section: doc Filename: pool/tools/j/jenkins-job-builder/jenkins-job-builder-doc_2.0.0~b2-2stretch.1_all.deb Size: 171076 SHA256: 825c1526bf7cb4829c4121406c8a399b8fb198a3b4160a7125f4390fa533078a SHA1: f7c7b25d119ad512eda9689b859b0c253f0ef226 MD5sum: a874abbb88daa76f7a9e35e193707fb9 Description: Configure Jenkins using YAML files - doc Jenkins Job Builder takes simple descriptions of Jenkins jobs in YAML format and uses them to configure Jenkins. You can keep your job descriptions in human readable text format in a version control system to make changes and auditing easier. It also has a flexible template system, so creating many similarly configured jobs is easy. . This package contains the documentation. Package: lava-coordinator Version: 0.1.5-31.1 Architecture: all Maintainer: Debian LAVA team Installed-Size: 70 Depends: python (<< 2.8), python (>= 2.7), python-daemon, python-lockfile, python:any (>= 2.6.6-7~) Homepage: http://www.linaro.org/engineering/validation Priority: optional Section: net Filename: pool/tools/l/lava-coordinator/lava-coordinator_0.1.5-31.1_all.deb Size: 13644 SHA256: 0d5e7341c7f2e0a510a4c8ab82ef4d6268be69b87daf0d4e3bad09f685a8fdd8 SHA1: 1b3591ac1ad84c9c2fb30b34873eef38de411a65 MD5sum: 744a73687daa2a301bc3bba563a313c0 Description: LAVA Coordinator daemon This package provides coordinator daemon to provide communication and synchronisation methods for test jobs running on multiple configured devices on instances of LAVA (Linaro Automated Validation Architecture). . One coordinator daemon can support more than one LAVA instance in a single lab. Package: lava-dispatcher Version: 2016.9-11.1 Architecture: amd64 Maintainer: Debian LAVA team Installed-Size: 2408 Depends: file, python-serial (>= 2.6), python-setuptools, python-daemon, python-guestfs, parted, kpartx, tar (>= 1.27), ser2net, sshfs, sudo, telnet, lava-tool (>= 0.4), python-configglue, python-configobj, python-json-schema-validator, python-lzma (>= 0.5.3), python-netifaces (>= 0.10.0), python-nose, python-pexpect, python-requests, python-yaml, python-zmq, python2.7, python:any (<< 2.8), python:any (>= 2.7.5-5~) Recommends: ntp, bzr, git, htop, tftpd-hpa, openbsd-inetd, qemu-system-x86 (>= 2.0.0), libguestfs-tools, nfs-kernel-server, python-launchpadlib, rpcbind, python-setproctitle, u-boot-tools, unzip, xz-utils, lxc (>= 1:2.0.0), bridge-utils, rsync Conflicts: python-linaro-dashboard-bundle Replaces: python-linaro-dashboard-bundle Provides: python-linaro-dashboard-bundle Multi-Arch: foreign Homepage: http://www.linaro.org/projects/test-validation/ Priority: optional Section: net Filename: pool/tools/l/lava-dispatcher/lava-dispatcher_2016.9-11.1_amd64.deb Size: 284838 SHA256: 4c21dd959e3def0ad9200380ae895f7b20f4d3717b9ebf1c344a64607520ea7e SHA1: 0d42d9b2dede6a6354a4e2ca95f967bc71dcb4f9 MD5sum: 74a96c6da37688f1a8a342b7f37db4f9 Description: Linaro Automated Validation Architecture dispatcher LAVA is a continuous integration system for deploying operating systems onto physical and virtual hardware for running tests. Tests can be simple boot testing, bootloader testing and system level testing, although extra hardware may be required for some system tests. Results are tracked over time and data can be exported for further analysis. . This package provides lava-dispatcher to dispatch LAVA jobs to configured devices. . A range of devices are supported for ARM and x86 architectures. Package: lava-tool Version: 0.11.2-21.1 Architecture: all Maintainer: Debian LAVA team Installed-Size: 338 Depends: python-setuptools, libpython2.7-stdlib, python (<< 2.8), python (>= 2.7), python-argcomplete (>= 0.3), python-json-schema-validator (>= 2.0), python-keyring, python-xdg (>= 0.19), python-yaml (>= 3.10), python:any (>= 2.6.6-7~) Breaks: lava-dashboard-tool (<< 0.8), lava-scheduler-tool (<< 0.6) Replaces: lava-dashboard-tool (<< 0.8), lava-scheduler-tool (<< 0.6) Homepage: http://www.linaro.org/engineering/validation Priority: optional Section: python Filename: pool/tools/l/lava-tool/lava-tool_0.11.2-21.1_all.deb Size: 50242 SHA256: 40f2bd78b74a3ba2b7f445712bcab60f30248f973ab5e77be996bc97faeb87f3 SHA1: 2ae545cbb651f97d84c8627f3e6728b4f54c2ca5 MD5sum: 2d669a0144fe9c2fa44596fc6b7556f6 Description: command line utility for LAVA This package provides a user space connection to a LAVA (Linaro Automated Validation Architecture) instance for submitting test jobs or querying the instance for device and job status over XMLRPC. Package: lavapdu-client Source: lavapdu Version: 0.0.5+git0.0.4-41-g7a4bd79-0.11.1 Architecture: all Maintainer: Debian LAVA team Installed-Size: 20 Depends: python2.7, python:any Conflicts: lavapdu Replaces: lavapdu Homepage: http://www.linaro.org/projects/test-validation/ Priority: optional Section: net Filename: pool/tools/l/lavapdu/lavapdu-client_0.0.5+git0.0.4-41-g7a4bd79-0.11.1_all.deb Size: 6234 SHA256: 4e6a14c4f5e8c3dbfc63f11d9362304b49a6d9a83ffe9f481c43f65405abdaf4 SHA1: 0449564c983541e5c53b3908583083b909782287 MD5sum: b436e35b8a1c01b577ccf75fbbc1b034 Description: LAVA PDU client The Linaro Automated Validation Architecture (LAVA) can use the pduclient to control the power supply to devices under test. . This package contains the pduclient to ensure that devices get a hard reboot. The client connects to the listen daemon on a local or remote host running lavapdu-daemon. Package: lavapdu-daemon Source: lavapdu Version: 0.0.5+git0.0.4-41-g7a4bd79-0.11.1 Architecture: all Maintainer: Debian LAVA team Installed-Size: 139 Depends: python-daemon, python-lockfile, python-paramiko, python-pexpect, python-psycopg2, python-setproctitle, python2.7, python:any (<< 2.8), python:any (>= 2.7.5-5~), init-system-helpers (>= 1.18~), postgresql, postgresql-client, telnet, python-systemd Conflicts: lavapdu Replaces: lavapdu Homepage: http://www.linaro.org/projects/test-validation/ Priority: optional Section: net Filename: pool/tools/l/lavapdu/lavapdu-daemon_0.0.5+git0.0.4-41-g7a4bd79-0.11.1_all.deb Size: 21556 SHA256: f7195f4c2053519ffa1e7f6404ca2d6463c1ff3f9e26b03ef97a96e938b6b177 SHA1: dfef653c2ceb82e1c67c254a6f8ccdfeea08ddff MD5sum: 8b3b2bfe41d4138d07592c6fe0c6dbba Description: LAVA PDU control daemon The Linaro Automated Validation Architecture (LAVA) PDU daemon supports a number of APC power distribution units which allow control over the power supplied to individual devices. Operations are recorded in a postgres database for the runner daemon to process. . This package contains the daemons to control the PDU. One daemon can manage multiple PDUs. Package: libbssolv-perl Version: 0.19.0-0co22.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 440 Depends: perl (>= 5.24.1~rc4-1), perlapi-5.24.1, libc6 (>= 2.22), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Priority: optional Section: utils Filename: pool/tools/libb/libbssolv-perl/libbssolv-perl_0.19.0-0co22.1_amd64.deb Size: 177858 SHA256: 6f4711b0ff9c41f99337e29d962e955228eb3a9bac87a58c2ac73b078e3910e8 SHA1: 45e6016efc2bb51aa141231106bb40098893eaf8 MD5sum: 7995d690b8a547b9a44abb9684967b9a Description: package dependency solver for OBS. libbssolv-perl provides a new approach to compute package dependencies. It is developed by SUSE developers and used by Novell SUSE's OBS(Open Build System). Package: libbssolv-perl-dbgsym Source: libbssolv-perl Version: 0.19.0-0co22.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 472 Depends: libbssolv-perl (= 0.19.0-0co22.1) Priority: extra Section: debug Filename: pool/tools/libb/libbssolv-perl/libbssolv-perl-dbgsym_0.19.0-0co22.1_amd64.deb Size: 445348 SHA256: 3f486735423921ab1c3ef28ad05cb5d2e5073f20612419bdff355b24c6a5bbac SHA1: 326af84fc3c9d32abcaf3411028a92d7f5eacb38 MD5sum: 59d3a81e993d0633c6ec470faccdd549 Description: Debug symbols for libbssolv-perl Auto-Built-Package: debug-symbols Build-Ids: 867b1aded2cab7bbc692a93835dd5dbb173c8dca Package: libcmocka-dev Source: cmocka Version: 1.0.1-3stretch.1 Architecture: amd64 Maintainer: David Prévot Installed-Size: 149 Depends: libcmocka0 (= 1.0.1-3stretch.1) Recommends: cmocka-doc Homepage: http://cmocka.org/ Priority: extra Section: libdevel Filename: pool/tools/c/cmocka/libcmocka-dev_1.0.1-3stretch.1_amd64.deb Size: 29086 SHA256: 05d967b144a4d3ea292a349e9db6c0553cd854f998396be00603345ec4245ad2 SHA1: a8b33a401efe19e7ee35b852293c86c23dcc058f MD5sum: 5f96f88529ada5788ece0e957664f106 Description: development files for the CMocka unit testing framework This package contains the library development files for CMocka. . The idea of CMocka is that a test application only requires the standard C library and the CMocka library itself to minimize conflicts with standard C headers especially on a lot of different platforms. . Features: * Easy to use framework to write unit tests * Support for mock objects * Testing of memory leaks, buffer overflows and underflows * Platform and compiler independent Package: libcmocka0 Source: cmocka Version: 1.0.1-3stretch.1 Architecture: amd64 Maintainer: David Prévot Installed-Size: 58 Depends: libc6 (>= 2.14) Multi-Arch: same Homepage: http://cmocka.org/ Priority: extra Section: libs Filename: pool/tools/c/cmocka/libcmocka0_1.0.1-3stretch.1_amd64.deb Size: 18960 SHA256: 056876ad6a46af21d688c08f43031f7898e58e24bf15b53daa24604fa39845af SHA1: 39bcb938fa78c8c7b00c610f73bbc0e441a452b1 MD5sum: 89f4d861903e9e0de0814f506d66d4ba Description: library for the CMocka unit testing framework This is the major library for CMocka. . The idea of CMocka is that a test application only requires the standard C library and the CMocka library itself to minimize conflicts with standard C headers especially on a lot of different platforms. . Features: * Easy to use framework to write unit tests * Support for mock objects * Testing of memory leaks, buffer overflows and underflows * Platform and compiler independent Package: libcmocka0-dbgsym Source: cmocka Version: 1.0.1-3stretch.1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: David Prévot Installed-Size: 53 Depends: libcmocka0 (= 1.0.1-3stretch.1) Multi-Arch: same Homepage: http://cmocka.org/ Priority: extra Section: debug Filename: pool/tools/c/cmocka/libcmocka0-dbgsym_1.0.1-3stretch.1_amd64.deb Size: 37022 SHA256: 143f96019cce38b7d669b4a316128734264c8b8ac411b5140b28cbb521f403eb SHA1: a1d0245f47245baccfb4607f6c326da68969161e MD5sum: 5089ecd2947b4387c967b9b3f8c10082 Description: Debug symbols for libcmocka0 Build-Ids: 19a887bb2221013fc5e156c110aca976bf9fc927 Package: libdaemons-ruby Source: ruby-daemons Version: 1.1.5-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 9 Depends: ruby-daemons Homepage: http://daemons.rubyforge.org Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-daemons/libdaemons-ruby_1.1.5-21.1_all.deb Size: 2948 SHA256: bb14b6d6388839bb3a8b1e3994679c1cf5efa3712c6c5bcdf02d70f287e812d0 SHA1: 53ddfc7194d05a1275e1201a550e5b0ddabb4457 MD5sum: 64410cedd10151cddc906ea5a1f38d1a Description: Transitional package for ruby-daemons This is a transitional package to ease upgrades to the ruby-daemons package. It can safely be removed. Package: libdaemons-ruby1.8 Source: ruby-daemons Version: 1.1.5-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 9 Depends: ruby-daemons Homepage: http://daemons.rubyforge.org Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-daemons/libdaemons-ruby1.8_1.1.5-21.1_all.deb Size: 2954 SHA256: f007ffef8bb01c8cd43d6fefbbb5a0089865ec90c6a8c24c07a9409485033a84 SHA1: 4daca82b0f837bad9b9f72a15cc4a904a561bec4 MD5sum: 83bc913d2fcbdc9921d868c6f3e68373 Description: Transitional package for ruby-daemons This is a transitional package to ease upgrades to the ruby-daemons package. It can safely be removed. Package: liberubis-ruby Source: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 19 Depends: ruby-erubis Homepage: http://www.kuwata-lab.com/erubis/ Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-erubis/liberubis-ruby_2.7.0-21.1_all.deb Size: 10902 SHA256: 32e3a244c6bf7ec861594ad73316449492213e3358689daf252dc8bb9a347bff SHA1: 5eb8223ee39beaa271582deabaed4e36a2229426 MD5sum: 23904312890ca10adfcafd5d7380eba7 Description: Transitional package for ruby-erubis This is a transitional package to ease upgrades to the ruby-erubis package. It can safely be removed. Package: liberubis-ruby1.8 Source: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 19 Depends: ruby-erubis Homepage: http://www.kuwata-lab.com/erubis/ Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-erubis/liberubis-ruby1.8_2.7.0-21.1_all.deb Size: 10902 SHA256: a8fa0b1bb50b3de925730039cf908b39e7acf803c9fe71588e7c7ef43421cce4 SHA1: 0328f67e3b6a5ebe288c9a40fd092b31b08aa108 MD5sum: b6f2f8c81e0de4403d4afaf897d5a44d Description: Transitional package for ruby-erubis This is a transitional package to ease upgrades to the ruby-erubis package. It can safely be removed. Package: liberubis-ruby1.9.1 Source: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 19 Depends: ruby-erubis Homepage: http://www.kuwata-lab.com/erubis/ Priority: extra Section: oldlibs Filename: pool/tools/r/ruby-erubis/liberubis-ruby1.9.1_2.7.0-21.1_all.deb Size: 10908 SHA256: 348d3206308d10162bd9a91caf3192f750ff92aaeaae6bf536b81c19b3409293 SHA1: 156603d40f8f599630f8eaf8659e87c7711e723e MD5sum: 78c331ce970ef421d3b6df904a82c9ea Description: Transitional package for ruby-erubis This is a transitional package to ease upgrades to the ruby-erubis package. It can safely be removed. Package: libftdi1-2 Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 78 Depends: libc6 (>= 2.14), libusb-1.0-0 (>= 2:1.0.9) Multi-Arch: same Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: libs Filename: pool/tools/libf/libftdi1/libftdi1-2_1.3-21.1_amd64.deb Size: 29374 SHA256: 3acf29d88d4f48e042f227e69abb9e0679c2048efece29b347311ae1825c5b0b SHA1: 7dae2aa5a9772849326cc3922d5c6edd763000c0 MD5sum: 033e7cb72aabbed2519f0ac12a874017 Description: Library to control and program the FTDI USB controllers This library could talk to FTDI's FT232BM, FT245BM, FT2232C, FT2232D, FT245R, FT232H and FT230X type USB chips from userspace. It uses libusb 1.0 to communicate with the chips. . Functionalities include the possibility to use the chips in standard mode, in bitbang mode, and to read or write the serial EEPROM. . This is the C version of the library. Package: libftdi1-2-dbgsym Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 53 Depends: libftdi1-2 (= 1.3-21.1) Multi-Arch: same Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: extra Section: debug Filename: pool/tools/libf/libftdi1/libftdi1-2-dbgsym_1.3-21.1_amd64.deb Size: 35914 SHA256: ab65ae506501d8237c2d31dcc9a71f04a3b3b7fef31cd15b8a3f3c333d630f65 SHA1: 9c605ab953076fe2efc51dc3d96d2807af79de63 MD5sum: 57d8c9da930aa2d419a0e1d570ebf10e Description: Debug symbols for libftdi1-2 Auto-Built-Package: debug-symbols Build-Ids: 945029f3d11dfa7e0c548bfa998f0845e65ef2ac Package: libftdi1-dev Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 136 Depends: libftdi1-2 (= 1.3-21.1), libusb-1.0-0-dev Recommends: libftdi1-doc Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: libdevel Filename: pool/tools/libf/libftdi1/libftdi1-dev_1.3-21.1_amd64.deb Size: 36042 SHA256: 7e5d80fcbae2f3db9145f12c4cbee150001a9f3d4b587920bb53611f798b5d50 SHA1: a6ba68bdb64fe6f9ceb1b55392044d87628f63b6 MD5sum: 8dfe433b0c5efb64612cf12482379eac Description: Development files for libftdi1 This package contains the header files and static library needed to compile applications that use libftdi1. Package: libftdi1-doc Source: libftdi1 Version: 1.3-21.1 Architecture: all Maintainer: Aurelien Jarno Installed-Size: 2797 Suggests: libftdi1-dev Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: doc Filename: pool/tools/libf/libftdi1/libftdi1-doc_1.3-21.1_all.deb Size: 221780 SHA256: 30d51e4d42fa570b96ba21ebb3a7afa49b4a4b65f2294442ea27965b5a6a7b46 SHA1: 5f98230ccece5477b2a5fe8aa7806bd3d5cf62df MD5sum: 14bdd43721cc311b98a4dd7463e68891 Description: Documentation for libftdi1 This package contains the documentation of the libftdi1 library. Package: libftdipp1-2v5 Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 51 Depends: libc6 (>= 2.4), libftdi1-2 (>= 1.2), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libusb-1.0-0 (>= 2:1.0.8) Breaks: libftdipp1-2 Replaces: libftdipp1-2 Multi-Arch: same Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: libs Filename: pool/tools/libf/libftdi1/libftdipp1-2v5_1.3-21.1_amd64.deb Size: 15794 SHA256: 3d48f56d9234bf234074dfd5c23638d9bd6492e3d60c65dcedb2a6e30d33072d SHA1: 7460148ab17bdf072293039dce9de0d42b070d72 MD5sum: cc59b6f1ccb3241754f570eb4a744db5 Description: Library to control and program the FTDI USB controllers This library could talk to FTDI's FT232BM, FT245BM, FT2232C, FT2232D, FT245R, FT232H and FT230X type USB chips from userspace. It uses libusb 1.0 to communicate with the chips. . Functionalities include the possibility to use the chips in standard mode, in bitbang mode, and to read or write the serial EEPROM. . This is the C++ version of the library. Package: libftdipp1-2v5-dbgsym Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 76 Depends: libftdipp1-2v5 (= 1.3-21.1) Multi-Arch: same Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: extra Section: debug Filename: pool/tools/libf/libftdi1/libftdipp1-2v5-dbgsym_1.3-21.1_amd64.deb Size: 56750 SHA256: 7bfc175e10a7189623f5bd056f1d3000cdf30cafa5169167c6213ea70032eacb SHA1: 9d8bad6e55ccb80e75d32edbc291231111a3297c MD5sum: a2dc78e586c82f38696355942c2e54fd Description: Debug symbols for libftdipp1-2v5 Auto-Built-Package: debug-symbols Build-Ids: 22029055eef21719d6ba621308abe82223a1d0f3 Package: libftdipp1-dev Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 70 Depends: libftdipp1-2v5 (= 1.3-21.1), libftdi1-dev (= 1.3-21.1), libboost-dev (>= 1.58) Recommends: libftdi1-doc Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: libdevel Filename: pool/tools/libf/libftdi1/libftdipp1-dev_1.3-21.1_amd64.deb Size: 15812 SHA256: dac188381367a168f8b0d25e7085da3667a3c87cd67e4987a3235b53d7e2e4b6 SHA1: 7ab2b7ea52da15f7d77d9be81b1e3fa2dbdef552 MD5sum: a0af22f83771da1cd20d61ecd553f371 Description: Development files for libftdipp1 This package contains the header files and static library needed to compile applications that use libftdipp1. Package: libjs-flot Source: flot Version: 0.8.2+dfsg-11.1 Architecture: all Maintainer: Debian Javascript Maintainers Installed-Size: 12 Depends: libjs-jquery-flot Homepage: http://code.google.com/p/flot/ Priority: optional Section: oldlibs Filename: pool/tools/f/flot/libjs-flot_0.8.2+dfsg-11.1_all.deb Size: 3580 SHA256: f5d78a4f402cd0e5f42f3aa44c67c8b33cb4be5c5fafda400642d26c3fcd582b SHA1: d4923841e3d1b010bad3998766b17d4836078afd MD5sum: b2bc23c64fbcfe662a13f1249efe3888 Description: transitional dummy package This is a transitional dummy package. It can safely be removed. Package: libjs-jquery-flot Source: flot Version: 0.8.2+dfsg-11.1 Architecture: all Maintainer: Debian Javascript Maintainers Installed-Size: 439 Depends: libjs-jquery Recommends: javascript-common, libjs-excanvas Suggests: libjs-jquery-flot-docs Breaks: libjs-flot (<< 0.8.1-1~) Replaces: libjs-flot (<< 0.8.1-1~) Homepage: http://code.google.com/p/flot/ Priority: optional Section: web Filename: pool/tools/f/flot/libjs-jquery-flot_0.8.2+dfsg-11.1_all.deb Size: 113818 SHA256: 753ce65ffc9fa465525667412f2f6536ed65aa26fbccfeac621410ca516128eb SHA1: f4e69311066751dbb50ff0f44f63d20ec4c9e040 MD5sum: e1a86e57c79a62fe6aab8e511dd5803c Description: plotting library for jQuery Flot is a pure JavaScript plotting library for jQuery. It produces graphical plots of arbitrary datasets on-the-fly client-side. The focus is on simple usage (all settings are optional), attractive looks and interactive features like zooming and mouse tracking. Package: libjs-jquery-flot-docs Source: flot Version: 0.8.2+dfsg-11.1 Architecture: all Maintainer: Debian Javascript Maintainers Installed-Size: 542 Depends: libjs-jquery-flot, libjs-jquery-ui Homepage: http://code.google.com/p/flot/ Priority: optional Section: doc Filename: pool/tools/f/flot/libjs-jquery-flot-docs_0.8.2+dfsg-11.1_all.deb Size: 298000 SHA256: a7b12edb08d9d5c656049c45714c7a390a3477ad30a11ef7afec1a641c0ae54f SHA1: b1d8476dbb15461824db6680fd8d9f45d1189221 MD5sum: e0cdb257f2ef00bf50e52399d061f095 Description: Documentation for Flot Flot is a pure JavaScript plotting library for jQuery. It produces graphical plots of arbitrary datasets on-the-fly client-side. The focus is on simple usage (all settings are optional), attractive looks and interactive features like zooming and mouse tracking. Package: libsocket-msghdr-perl Version: 0.04-0co11.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 48 Depends: perl (>= 5.24.1~rc4-1), perlapi-5.24.1, libc6 (>= 2.14) Homepage: http://search.cpan.org/dist/Socket-MsgHdr/ Priority: optional Section: perl Filename: pool/tools/libs/libsocket-msghdr-perl/libsocket-msghdr-perl_0.04-0co11.1_amd64.deb Size: 14962 SHA256: 176e62e37a633f619c174d6786e610b504aa81e34a01df2828e00a710d42ef3a SHA1: c3ffa1a4b09094eb3904f039f590cc10b06d2212 MD5sum: ef0ef31cfc6ad7c32015bde91ad4e0f8 Description: sendmsg, recvmsg and ancillary data operations Socket::MsgHdr provides advanced socket messaging operations via sendmsg and recvmsg. Like their C counterparts, these functions accept few parameters, instead stuffing a lot of information into a complex structure. . This structure describes the message sent or received (buf), the peer on the other end of the socket (name), and ancillary or so-called control information (cmsghdr). This ancillary data may be used for file descriptor passing, IPv6 operations, and a host of implemenation-specific extensions. . This description was automagically extracted from the module by dh-make-perl. Package: libsocket-msghdr-perl-dbgsym Source: libsocket-msghdr-perl Version: 0.04-0co11.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 43 Depends: libsocket-msghdr-perl (= 0.04-0co11.1) Homepage: http://search.cpan.org/dist/Socket-MsgHdr/ Priority: extra Section: debug Filename: pool/tools/libs/libsocket-msghdr-perl/libsocket-msghdr-perl-dbgsym_0.04-0co11.1_amd64.deb Size: 29662 SHA256: 0d1e3eee53ab493d877f7850efb56f8f5c9a7790796107ccf97794c85161cb12 SHA1: 12d266c2b32ca0d6c67802341bcadc2b9a45d8f1 MD5sum: 2eee26a7a9fd12ac56a6a0f28e63b9b2 Description: Debug symbols for libsocket-msghdr-perl Auto-Built-Package: debug-symbols Build-Ids: 41bf25447a87c4be60d684fb5ac56522b15fef50 Package: linaro-image-tools Version: 2012.09.1-1co4311.1 Architecture: amd64 Maintainer: Linaro Packagers Installed-Size: 129 Depends: apt-utils, dosfstools, parted, python (>= 2.6.6-3~), python-argparse, python-dbus, python-debian (>= 0.1.16ubuntu1~), python-linaro-image-tools (= 2012.09.1-1co4311.1), python-parted, python-yaml, python-mako, sudo, u-boot-tools | uboot-mkimage, grub-pc, python:any Recommends: btrfs-tools, command-not-found, qemu-user-static | qemu-kvm-extras-static, udisks, cgpt Priority: optional Section: devel Filename: pool/tools/l/linaro-image-tools/linaro-image-tools_2012.09.1-1co4311.1_amd64.deb Size: 89494 SHA256: f61f21325145bc95e0bf31019160e1ff0e576fe3d1e0b77219ec71d5d1197451 SHA1: a995339b43ccc75f09a44ea9cb82526fe02aba49 MD5sum: 6fcaae09fb9da87d025aa77203c14260 Description: collection of tools to work with Linaro images This package offers a set of tools for use with Linaro images. . The provided linaro-media-create command allows writing Linaro images to a SD card, or generating an image file which you can boot in QEMU. Package: live-build Version: 5.0~a9-1co33.1 Architecture: all Maintainer: Live Systems Maintainers Installed-Size: 799 Depends: debootstrap Recommends: apt-utils, cpio, wget, live-boot-doc, live-config-doc, live-manual-html | live-manual Suggests: gpgv, debian-keyring Homepage: http://live-systems.org/devel/live-build/ Priority: optional Section: misc Filename: pool/tools/l/live-build/live-build_5.0~a9-1co33.1_all.deb Size: 216530 SHA256: 7993f64e09eca27b431cf2dcbbd85265dc9c691081586309c8e894ff46515a94 SHA1: 877d260de1667ab52dfd3a1b38a4ce6003e28ffd MD5sum: 36d0a8706714bfc5bbaa6fac9be67dac Description: Live System Build Components The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-build contains the components to build a live system from a configuration directory. Package: lqa Version: 20180702.0-1stretch.1 Architecture: all Maintainer: Andrew Lee (李健秋) Installed-Size: 362 Depends: python-jinja2, python-requests, python-yaml, python3:any (>= 3.3.2-2~), python:any (<< 2.8), python:any (>= 2.7.5-5~), python3-jinja2, python3-requests, python3-yaml Homepage: https://gitlab.collabora.com/collabora/lqa Priority: optional Section: utils Filename: pool/tools/l/lqa/lqa_20180702.0-1stretch.1_all.deb Size: 26314 SHA256: 9f7ab065d221216d3d4ed94ddabd03259db0c9dce636e173e7500cff074d3022 SHA1: 331ef4bf7d88019e6d52d2b74f6e44b5ee0adadd MD5sum: 1bf1d9b83a2a5816d9fdbe0117f71ccf Description: lava qa tool This package contains a command line tool for LAVA quality assurance tasks. Package: merge-o-matic Source: merge-our-misc Version: 2017.11.24stretch.1 Architecture: all Maintainer: Singularity Installed-Size: 19 Depends: merge-our-misc Priority: optional Section: oldlibs Filename: pool/tools/m/merge-our-misc/merge-o-matic_2017.11.24stretch.1_all.deb Size: 6734 SHA256: ef446340ddc1842f9ba200d218d3abd04bd14ff7e79ad6ec168a570f3c9cc1fe SHA1: 704faddf85861ed83b3ba94afc7175fc398ff564 MD5sum: d78510a06ec818a98805e0e2a07ce397 Description: transitional package merge-our-misc (also known as "mom") is a modified version of Ubuntu's Merge-o-Matic tool. . This package exists to automate upgrades from previous packaging of this tool (under the name merge-o-matic) to merge-our-misc. Package: merge-our-misc Version: 2017.11.24stretch.1 Architecture: all Maintainer: Singularity Installed-Size: 366 Pre-Depends: adduser Depends: python:any (>= 2.7.5-5~), apache2 | httpd, cron, logrotate, osc, python-pychart, python-jinja2, python (>= 2.7) Breaks: merge-o-matic (<< 2014.02) Replaces: merge-o-matic (<< 2014.02) Priority: optional Section: utils Filename: pool/tools/m/merge-our-misc/merge-our-misc_2017.11.24stretch.1_all.deb Size: 60960 SHA256: 95f27dd21f0d3bf7bce5ab55b36f2a40464f74431c5f765eed99134b4bde17aa SHA1: 4c9df941fed2492179109f348a02ec3a6a3227aa MD5sum: 6ade8a8bb9b5672478a2248db1dc60ad Description: automated merge system for Debian derivatives merge-our-misc (also known as "mom") is a modified version of Ubuntu's Merge-o-Matic tool. . It produces automated merges of the differences between source packages in two distributions, as well as collections of useful patches to aid manual merging or review. Package: obs-api Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 2552 Depends: debconf (>= 0.5) | debconf-2.0, apache2, dbconfig-common, libapache2-mod-passenger, libapache2-mod-xforward, mysql-client, mysql-server, ruby1.8, rubygems-integration, ruby-daemons, ruby-erubis, ruby-json, ruby-mysql, ruby-nokogiri, ruby-rails-2.3, ruby-rails-xss, ruby-rdoc, ruby-delayed-job Suggests: obs-server Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-api_2.3.8-0co4310.1_amd64.deb Size: 369478 SHA256: 41e55d7c2109c8633aae6ea973f9b817f0f423276118369dff4ccea5305699d7 SHA1: 36e523e64e35342e1e6e2e0fbaa96b8c3babcfe8 MD5sum: b1460358adf3387c286dc5304167f528 Description: Open Build Service (api) This is the API server instance for the OBS. Package: obs-build Version: 2013.10.24co101.1 Architecture: all Maintainer: Andrew Lee (李健秋) Installed-Size: 694 Depends: perl:any, rpm, debootstrap Recommends: bsdtar, liblwp-useragent-determined-perl, libtimedate-perl, liburi-perl, libxml-parser-perl, pdl, rpm2cpio Priority: optional Section: devel Filename: pool/tools/o/obs-build/obs-build_2013.10.24co101.1_all.deb Size: 100950 SHA256: 2f72e2ec086701e3623fb5893e0745f10b8aa8758bcbc89f9e5aa33eeea38857 SHA1: fbeb04f0bb00e0952e1339c5bfa3648dfb7bec07 MD5sum: b0bf457b0dd6cdde1be465d151115d8f Description: script to build SUSE Linux RPMs This package provides a script for building RPMs for SUSE Linux in a chroot environment. Package: obs-productconverter Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 71 Depends: obs-server Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-productconverter_2.3.8-0co4310.1_amd64.deb Size: 19782 SHA256: 259f51a5b5fe786604e7b09e3327e729e7a41196520801776edc72b186005f30 SHA1: 2042c84dceac375f926fc2e59e311152c83d5ab6 MD5sum: 016d213eb0525fb7a4d11d10c2d1335b Description: Open Build Service (product definition utility) The obs_productconvert is a utility to create Kiwi- and Spec- files from a product definition. Package: obs-server Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 1300 Depends: apt-utils, diffutils, libbssolv-perl, libfile-sync-perl, libsocket-msghdr-perl, obs-build, patch, reprepro, sysvinit-utils, memcached Recommends: createrepo (>= 0.9.8), obs-signd, slpd, yum, phab-handler, qa-bughandler Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-server_2.3.8-0co4310.1_amd64.deb Size: 242688 SHA256: 89b68e7745e4262de3b5471887580c847b6e819f1b62daf309c92d72c0f19413 SHA1: abcc0279f58a9a5d0f252d723f0f52058981d216 MD5sum: 5726c4d3c7480b950ba1f1f6b4c2d5af Description: Open Build Service (server component) The Open Build Service (OBS) backend is used to store all sources and binaries. It also calculates the need for new build jobs and distributes it. Package: obs-signd Version: 2.1.5-co32.1 Architecture: amd64 Maintainer: Jeremy Whiting Installed-Size: 103 Pre-Depends: libcap2-bin Depends: libc6 (>= 2.14), dpkg (>= 1.16.5), gnupg2 Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/obs-signd/obs-signd_2.1.5-co32.1_amd64.deb Size: 28176 SHA256: 5fcadb70f5a44c17d610693392d10075bfb302b61f2ad1bdc899140c0184449c SHA1: 1c36a2809537996e8b0486709f71c811d33b5440 MD5sum: 5e8abcd6be2b7450ee40df5e795dd405 Description: The sign daemon The Open Build Service (OBS) sign client and daemon. This daemon can be used to sign anything via gpg, but it speaks with a remote server to avoid the need to host the private key on the same server. Package: obs-signd-dbgsym Source: obs-signd Version: 2.1.5-co32.1 Architecture: amd64 Maintainer: Jeremy Whiting Installed-Size: 20 Depends: obs-signd (= 2.1.5-co32.1) Homepage: http://en.opensuse.org/Build_Service Priority: extra Section: debug Filename: pool/tools/o/obs-signd/obs-signd-dbgsym_2.1.5-co32.1_amd64.deb Size: 3316 SHA256: 48d8b7cdf94ab1bf80aeb5f8109168aa2a269ce9d44f6a0a58cf80d74885220f SHA1: 233a19fd20d39c5b3d68a4439f74a67485f05a11 MD5sum: b080075ae7eaaf5efe204cb65417b542 Description: Debug symbols for obs-signd Auto-Built-Package: debug-symbols Build-Ids: 937b9a9411e64a3f30fb7c6ab2bfe765f9adb393 Package: obs-utils Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 25 Depends: osc, ruby1.8 Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-utils_2.3.8-0co4310.1_amd64.deb Size: 10048 SHA256: 4cde3a3fced59fd1b6dc03526bb9466da2e9f8f4b57b7b2876525e9ba05f73a0 SHA1: 089f785fe603ec976e3ee734ecd39d0e7f856ac7 MD5sum: ba65e78d50ad960ee4e0a97112e094a7 Description: Open Build Service (utilities) The obs-utils contains tools for Open Build Service. Including: * obs_mirror_project - a tool to copy the binary data of a project from one obs to another * obs_project_update - a tool to copy a packages of a project from one obs to another Package: obs-webui Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 3145 Depends: debconf (>= 0.5) | debconf-2.0, apache2, dbconfig-common, libapache2-mod-passenger, libapache2-mod-xforward, mysql-client, opensuse-themes-obs, collabora-themes-obs Recommends: mysql-server Suggests: obs-server, obs-api Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-webui_2.3.8-0co4310.1_amd64.deb Size: 587924 SHA256: c5245c666fb3ad34ae7aab6c7419a6144275b7a189d73b08bf055b358573e67d SHA1: 310d9044e17a51d38174e374ac6a718875f5750e MD5sum: d11160908edbbc87842b09cebade6856 Description: Open Build Service (webui) This is the web client for the OBS. Package: obs-worker Source: open-build-service Version: 2.3.8-0co4310.1 Architecture: amd64 Maintainer: Andrew Lee (李健秋) Installed-Size: 35 Depends: apt-utils, binutils, bsdtar, curl, debootstrap, libtimedate-perl, libxml-parser-perl, libxml-simple-perl, lzma, rpm, screen, slptool Homepage: http://en.opensuse.org/Build_Service Priority: optional Section: devel Filename: pool/tools/o/open-build-service/obs-worker_2.3.8-0co4310.1_amd64.deb Size: 11270 SHA256: 32e19b3b2467d1e39a3f54347ad7b0f3886aa317039d301689671bf09b8ad427 SHA1: 13871a2779aac404b0a777ed8a839ef6112d25d8 MD5sum: 062800edabcfabf95a805653601e4604 Description: Open Build Service (build host component) This is the obs build host, to be installed on each machine building packages in this obs installation. Install it alongside obs-server to run a local playground test installation. Package: opensuse-themes-obs Version: 2.3.0-0co11.1 Architecture: all Maintainer: Sjoerd Simons Installed-Size: 15678 Homepage: https://github.com/openSUSE/opensuse-themes/ Priority: extra Section: devel Filename: pool/tools/o/opensuse-themes-obs/opensuse-themes-obs_2.3.0-0co11.1_all.deb Size: 6725318 SHA256: 0bdaf0b3bf0c4082f685af5c843405059192fa146f84aa6289e616c56985c190 SHA1: 886c26fab6639b0d7d8421bcc0b41c74cf23f371 MD5sum: a3c5083fddc4a21bd1012677edf79a3c Description: Web UI themes for OBS Opensuses default theme for OBS Package: osc Version: 0.152.0-1co21.1 Architecture: all Maintainer: Michal Čihař Installed-Size: 957 Depends: python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~), python-urlgrabber, python-rpm, python-m2crypto, ca-certificates Recommends: rpm2cpio, cpio, sensible-utils, python-keyring, obs-build Suggests: python-gnomekeyring, gnome-keyring Homepage: http://en.opensuse.org/openSUSE:OSC Priority: extra Section: devel Filename: pool/tools/o/osc/osc_0.152.0-1co21.1_all.deb Size: 213304 SHA256: bfd08c71f5ae594a28f10f5ab08e1085f71db9db17e315c9ea4e3ca6b284ee45 SHA1: 77b0eebbcb534766c0dd23e78a37a61a28fa2e31 MD5sum: 9f257e67fad6bb80a752baaeaf008585 Description: OpenSUSE (buildsystem) commander Commandline client for the openSUSE Build Service, which allows one to access repositories in the openSUSE Build Service in similar way as Subversion repositories. . The openSUSE Build Service is service that allows developers to package software for all major Linux distributions. Package: osc-plugins-dput Version: 20160627.01.1 Architecture: all Maintainer: Singularity Installed-Size: 21 Depends: osc (>= 0.139), python-debian Priority: optional Section: x11 Filename: pool/tools/o/osc-plugins-dput/osc-plugins-dput_20160627.01.1_all.deb Size: 5642 SHA256: d802108efce0308e4ef2cf0ff97836d92d83a7c04fed9399f3393b343f5a9de6 SHA1: e41a8d2baedbe4d5d345a56bc20c92456d1003ab MD5sum: 806939ef3bfbfff0c72ac3ad2ed20b6f Description: dput plugin for OpenSUSE (buildsystem) commander This package contains the dput plugin for OpenSUSE (buildsystem) commander. . This dput plugin is designed to be able to quickly upload a random debian source package without the need of doing a checkout, adding the source, removing the old files and committing it again. . See 'osc help dput' for details. Package: phab-handler Version: 0.0.2-0co26.1 Architecture: all Maintainer: Héctor Orón Martínez Installed-Size: 27 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-phabricator Priority: extra Section: python Filename: pool/tools/p/phab-handler/phab-handler_0.0.2-0co26.1_all.deb Size: 4636 SHA256: af5e9ba414fc55889a1559c502daf3cc3689d68cb136162dbc97fdd60906d160 SHA1: 5fd50db8a5842bfbab3ac40fc69da33da0e4bf09 MD5sum: 0dce869f78af48b0663e2d6858c63b19 Description: Phabricator Task Handler Helper tool which works with python-phabricator to ease Phabricator Maniphest task management. Package: python-alabaster Source: alabaster Version: 0.7.8-1~bpo8+11.1 Architecture: all Maintainer: Jeremy T. Bouse Installed-Size: 80 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Suggests: python-sphinx Provides: python2.7-alabaster Homepage: https://github.com/bitprophet/alabaster Priority: extra Section: python Filename: pool/tools/a/alabaster/python-alabaster_0.7.8-1~bpo8+11.1_all.deb Size: 18564 SHA256: dea9b734d7faed6cc87bb5395f9759b06c7c43c342c9bf1b7d732666144fd67a SHA1: 77060d4f5bf5a39bd17871ab164e2ccf53acfdf4 MD5sum: 5d89ec0dc0cfcfd0531b72037d9452da Description: Configurable sidebar-enabled Sphinx theme (Python 2) This theme is a modified "Kr" Sphinx theme from @kennethreitz (especially as used in his Requests project), which was itself originally based on @mitsuhiko's theme used for Flask & related projects. . This is the Python 2 version of the package. Package: python-argcomplete Version: 0.8.1-11.1 Architecture: all Maintainer: Marco Nenciarini Installed-Size: 97 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Priority: optional Section: python Filename: pool/tools/p/python-argcomplete/python-argcomplete_0.8.1-11.1_all.deb Size: 22324 SHA256: d7440a448046bfee17fbb633bc28a75adf44c1991ce8455b78a8fc65ef9a8a10 SHA1: c77c638592b417e58ee0bdfbb9e25813ec833d92 MD5sum: 9d0a48e36d665e5a839a6f94606d85d7 Description: bash tab completion for argparse Argcomplete provides easy, extensible command line tab completion of arguments for your Python script. . It makes two assumptions: . * You're using bash as your shell * You're using argparse to manage your command line arguments/options . Argcomplete is particularly useful if your program has lots of options or subparsers, and if your program can dynamically suggest completions for your argument/option values (for example, if the user is browsing resources over the network). . This package provides the module for Python 2.x. Package: python-contextlib2 Source: contextlib2 Version: 0.5.1-11.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 40 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: http://contextlib2.readthedocs.org/ Priority: optional Section: python Filename: pool/tools/c/contextlib2/python-contextlib2_0.5.1-11.1_all.deb Size: 10836 SHA256: 6d475a0388fc455e71e2175c1ee79c4498d8105b5baf3b0927376a0d001b3a6d SHA1: d2b2c2f292349886507b4dc5118580f8d7593075 MD5sum: 83e1ff7cfa6c43d436d9e8585b9223aa Description: Backport and enhancements for the contextlib module - Python 2.7 contextlib2 is a backport of the standard library's contextlib module to earlier Python versions. . It also serves as a real world proving ground for possible future enhancements to the standard library version. . This package contains the Python 2.7 module. Package: python-django-south Version: 1.0-0.11.1 Architecture: all Maintainer: David Watson Installed-Size: 534 Depends: python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~), python-django (>= 1.2) Breaks: python-django-markupfield (<< 1.0.1) Homepage: http://south.aeracode.org/ Priority: optional Section: python Filename: pool/tools/p/python-django-south/python-django-south_1.0-0.11.1_all.deb Size: 83696 SHA256: 080cd787ca69e214022d4b13499e610cea21256adb2bfdc80b50182a9f35ff9d SHA1: e43aa2b50b4068874fb2e01a0f21adb475ea72d3 MD5sum: 4a89bdea76a7da5d7da4211a6bc63a22 Description: Intelligent schema migrations for django apps An intelligent database migrations library for the Django web framework. It is database-independent and DVCS-friendly, as well as a whole host of other features. . * Intelligent; it knows if you've missed out a migration or two * Database independent, so there's no hassle if you need to move databases. * Easy; it can write migrations for you, and it takes about a minute to convert your app over to use South. * Designed for a pluggable Django world; you can declare dependencies between apps so they all migrate together correctly, and you can still use syncdb for your non-migrated apps without it interfering. Package: python-ec3po Source: chromiumos-ec Version: 20161128-11.1 Architecture: amd64 Maintainer: Heiko Stuebner Installed-Size: 147 Homepage: https://chromium.googlesource.com/chromiumos/platform/ec Priority: optional Section: python Filename: pool/tools/c/chromiumos-ec/python-ec3po_20161128-11.1_amd64.deb Size: 25824 SHA256: 6d537e44e77fe71ccc19c7b2f662f7004952fa795e4bf07805c8cc75450886dc SHA1: f8dd20431ebe37cea951e3f8c57efccae7386213 MD5sum: 0a3e90b29f2cc04f36d3513bfde37b1b Description: The ChromeOS EC console interpreter EC-3PO is a console interpreter which migrates the rich debug console from the EC itself to the host. This allows for a rich debug console without impacting EC image sizes while also allowing the development of new console features. . This library is for example needed by the chromeos hcdtools to let servo board talk to ChromeOS devices. Package: python-ftdi1 Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 297 Depends: libc6 (>= 2.14), libftdi1-2 (>= 1.3), libusb-1.0-0 (>= 2:1.0.8), python (<< 2.8), python (>= 2.7~), python:any (<< 2.8), python:any (>= 2.7.5-5~) Provides: python2.7-ftdi1 Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: python Filename: pool/tools/libf/libftdi1/python-ftdi1_1.3-21.1_amd64.deb Size: 51746 SHA256: eb66d3cc45b1b528ce5cc3ec0c542027f5191b893c58af105ce1147383cfbb33 SHA1: e45c2a8a71c9f4660356844dfcc475a916a00155 MD5sum: 1e8d8a3d1ee481038400b9cf228a5339 Description: Python module to control and program the FTDI USB controllers This library could talk to FTDI's FT232BM, FT245BM, FT2232C, FT2232D, FT245R, FT232H and FT230X type USB chips from userspace. It uses libusb 1.0 to communicate with the chips. . Functionalities include the possibility to use the chips in standard mode, in bitbang mode, and to read or write the serial EEPROM. . This package provides the ftdi1 module on the Python 2 module path. It is complemented by python3-ftdi1. Package: python-ftdi1-dbgsym Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 179 Depends: python-ftdi1 (= 1.3-21.1) Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: extra Section: debug Filename: pool/tools/libf/libftdi1/python-ftdi1-dbgsym_1.3-21.1_amd64.deb Size: 144098 SHA256: 85b729c4fb3951fe91c3d2201e710d9c90373a038e7200297c07dcbadd49bb8e SHA1: 196ffe9ec7755ed2cd158e08560437cc1d20bc5a MD5sum: 74fdf3e0fd764d6ecb90f9946e0b5b42 Description: Debug symbols for python-ftdi1 Auto-Built-Package: debug-symbols Build-Ids: 752881d325ed97a46876f5590eceabd2c0406e43 Package: python-hdctools-servo Source: hdctools Version: 20161122-13.1 Architecture: amd64 Maintainer: Heiko Stuebner Installed-Size: 2710 Depends: python-usb, python-pexpect, python-numpy, python-ec3po, libftdi1-2 (>= 1.2), libc6 (>= 2.15), libusb-1.0-0 (>= 2:1.0.8), python (<< 2.8), python (>= 2.7~), python:any (<< 2.8), python:any (>= 2.7.5-5~) Recommends: python-hdctools-usbkm232 Homepage: https://chromium.googlesource.com/chromiumos/third_party/hdctools/ Priority: optional Section: python Filename: pool/tools/h/hdctools/python-hdctools-servo_20161122-13.1_amd64.deb Size: 180382 SHA256: 72c19660327986f314b445b156d430faa941cd1ea2b548c6ca3d0b946167a9bc SHA1: ff05513535a3ea8abdf1159f6c21cdc07eb64a3c MD5sum: ad4fcf3f0e8c7bd418290bc0e4b6ad17 Description: Chrome OS Hardware Debug & Control Tools Communicate with and control servo debug boards. . Contains both the backend server that talks to servo boards, as well as a binary allowing to control the server. Package: python-hdctools-servo-dbgsym Source: hdctools Version: 20161122-13.1 Architecture: amd64 Maintainer: Heiko Stuebner Installed-Size: 74 Depends: python-hdctools-servo (= 20161122-13.1) Homepage: https://chromium.googlesource.com/chromiumos/third_party/hdctools/ Priority: extra Section: debug Filename: pool/tools/h/hdctools/python-hdctools-servo-dbgsym_20161122-13.1_amd64.deb Size: 42408 SHA256: 0a5987eae8f676d8b8a6aa5583250409d20cb4d699e6a2af50f20b0a891b4db2 SHA1: 2bb9cc7ef9fc57751be3274ba31eb4738844f7ee MD5sum: 3977b396f39aa223cce8d4507eae3c03 Description: Debug symbols for python-hdctools-servo Auto-Built-Package: debug-symbols Build-Ids: 015e2483bfcee26224ae507696e1b81c9165595a 4840e75240dfd3e8ea767a9123ba9dbba016d756 c8a201dc2f3c87cfabd345611acefd29517cfe65 Package: python-hdctools-usbkm232 Source: hdctools Version: 20161122-13.1 Architecture: amd64 Maintainer: Heiko Stuebner Installed-Size: 47 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://chromium.googlesource.com/chromiumos/third_party/hdctools/ Priority: optional Section: python Filename: pool/tools/h/hdctools/python-hdctools-usbkm232_20161122-13.1_amd64.deb Size: 7886 SHA256: 91821d358568aa07bf5e972c52f91fe6d0cc85090fdc15ba1d99922ef81fe50f SHA1: 834224d4964326ddc747f1b75d53bbbf3af6211c MD5sum: dbf28bccf31264812a88315c1c2c56e6 Description: Control and interact with USBKM232 USB keyboard emulator The usbkm232 is an RS232 (uart) to USB keyboard emulator. . See http://www.hagstromelectronics.com/products/usbkm232.html for device details. . This package contains a python class to interact with the device as well as some convenience scripts to be used when calling FAFT related autotests via the 'ctrl_d_cmd|enter_cmd' hooks. Package: python-imagesize Version: 0.7.1-1~bpo8+11.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 24 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/shibukawa/imagesize_py Priority: optional Section: python Filename: pool/tools/p/python-imagesize/python-imagesize_0.7.1-1~bpo8+11.1_all.deb Size: 4046 SHA256: b8f3e88bed5feba9adf2c5604dd3e6b6c77966c84368f4595563e9098c90df4a SHA1: 7f0c0ea85ae759c531ed20c7b755789e69d8dccf MD5sum: 587381cc37664a877a9f1253620422da Description: Python 2 module for getting image size from png/jpeg/jpeg2000/gif file This small module parses image header and returns width and height of the image. Supported formats are: PNG, JPEG, JPEG2000, GIF. . This is the Python 2 version of the module. Package: python-jenkins Version: 0.4.11-11.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 83 Depends: python-multi-key-dict, python-pbr (>= 0.8.2), python-six (>= 1.3.0), python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: http://launchpad.net/python-jenkins Priority: optional Section: python Filename: pool/tools/p/python-jenkins/python-jenkins_0.4.11-11.1_all.deb Size: 17420 SHA256: c002c3bdd33dfde92afd51b8bdf7db5a78306648e68a202a3577aae9a1a5d26d SHA1: b1119eb3809e340cd3770f8014de4077baabca75 MD5sum: 670450076c64307b224af7d26339e5ea Description: bindings for the Jenkins Remote API - Python 2.7 This package provides Python bindings for the Jenkins Remote API. It current supports management of: . * Project configuration * Build control * Slave node configuration . This package contains the Python 2.7 module. Package: python-jenkins-doc Source: python-jenkins Version: 0.4.11-11.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 224 Depends: libjs-sphinxdoc (>= 1.0) Homepage: http://launchpad.net/python-jenkins Priority: optional Section: doc Filename: pool/tools/p/python-jenkins/python-jenkins-doc_0.4.11-11.1_all.deb Size: 33760 SHA256: ea7c62daa933de2bd79eed2f271f18dff048cecaf4e20618e9760e226e1df375 SHA1: 02fc8164d041b957c3e6023a5c0f9490e1fddf79 MD5sum: 482039f694c6305da52d483a95bb4960 Description: bindings for the Jenkins Remote API - doc This package provides Python bindings for the Jenkins Remote API. It current supports management of: . * Project configuration * Build control * Slave node configuration . This package contains the documentation. Package: python-jenkins-job-builder Source: jenkins-job-builder Version: 2.0.0~b2-2stretch.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1011 Depends: python-jenkins, python-pbr, python-pkg-resources, python-six (>= 1.9.0), python-stevedore, python-yaml, python2.7:any, python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: http://ci.openstack.org/jenkins-job-builder Priority: optional Section: python Filename: pool/tools/j/jenkins-job-builder/python-jenkins-job-builder_2.0.0~b2-2stretch.1_all.deb Size: 173262 SHA256: 6b650b05c980e69e7ba147220827c5382d4f3483707f012034b1ba1b9f7a3101 SHA1: 7cc4efeb177a2f4beb407605f16a2622dfab71de MD5sum: 46dadd17927d9d620e5fb0c7b0753800 Description: Configure Jenkins using YAML files - Python 2.7 Jenkins Job Builder takes simple descriptions of Jenkins jobs in YAML format and uses them to configure Jenkins. You can keep your job descriptions in human readable text format in a version control system to make changes and auditing easier. It also has a flexible template system, so creating many similarly configured jobs is easy. . This package contains the Python 2.7 module. Package: python-jenkins-job-builder-pipeline Source: jenkins-job-builder-pipeline Version: 20160912+bd1bae-13.1 Architecture: all Maintainer: Andrew Lee (李健秋) Installed-Size: 25 Depends: python-jenkins-job-builder, python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/rusty-dev/jenkins-job-builder-pipeline Priority: optional Section: python Filename: pool/tools/j/jenkins-job-builder-pipeline/python-jenkins-job-builder-pipeline_20160912+bd1bae-13.1_all.deb Size: 4240 SHA256: 50eb41ab019043d258883ffbad8c4857611cc5685a9358b429632821b38a392d SHA1: b39cfda4b2236c83ff719aba31cddfdaabddb261 MD5sum: 359c07c9fcac74bf96aec26d4d368d82 Description: pipeline job generation plugin for jenkins-job-builder This is a plugin for jenkins-job-builder to support pipeline job generation. Package: python-json-schema-validator Source: json-schema-validator Version: 2.3.1-31.1 Architecture: all Maintainer: Neil Williams Installed-Size: 127 Depends: python (<< 2.8), python (>= 2.7), python-simplejson (>= 2.0.9), python:any (>= 2.6.6-7~) Suggests: python-json-schema-validator-doc Provides: python2.7-json-schema-validator Homepage: https://github.com/zyga/json-schema-validator Priority: optional Section: python Filename: pool/tools/j/json-schema-validator/python-json-schema-validator_2.3.1-31.1_all.deb Size: 17610 SHA256: b8e9e78389a4c014d153ce231899cb3536419c4bdbdbfc20a0414f97aa6f2baa SHA1: 007fa8284f3405d8a2904df1a091bd32d5d1c4cb MD5sum: c033ab93fe9dd90f4c2a01425f2eb32a Description: JSON schema validation utility This package provides a JSON Schema validator conforming to a subset of second draft of the specification. . JSON files can be verified against a schema expressed in the python source code, producing either a SchemaError exception or ValidationError exception. Package: python-json-schema-validator-doc Source: json-schema-validator Version: 2.3.1-31.1 Architecture: all Maintainer: Neil Williams Installed-Size: 182 Depends: libjs-sphinxdoc (>= 1.0) Recommends: libjs-jquery Homepage: https://github.com/zyga/json-schema-validator Priority: optional Section: doc Filename: pool/tools/j/json-schema-validator/python-json-schema-validator-doc_2.3.1-31.1_all.deb Size: 26860 SHA256: 08e0252c32b6067fd1bdf6ec6f38829e88636ec90b89d93f21300c2abd678f98 SHA1: c8cc4ca3c7826bdac4b56f64bbaf461d714ea055 MD5sum: 8e015279c61b6c8dc4d2853316ac80a6 Description: JSON schema validation utility json-schema-validator provides a JSON Schema validator conforming to a subset of second draft of the specification. . This package contains the HTML documentation. Package: python-linaro-image-tools Source: linaro-image-tools Version: 2012.09.1-1co4311.1 Architecture: all Maintainer: Linaro Packagers Installed-Size: 889 Depends: python-apt, python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~) Priority: optional Section: python Filename: pool/tools/l/linaro-image-tools/python-linaro-image-tools_2012.09.1-1co4311.1_all.deb Size: 186704 SHA256: b37eb05da32d227deb5ce7d37b34a9c782f84211c417ca749b42ff13aa3d4b7b SHA1: dc6ae636506447d32fb84f9e8984d47920eab71d MD5sum: 1ede9ab16560e9bf15716ed035d8d494 Description: Python library for the manipulation of Linaro bootable media Linaro images are generated by combining generic tarballs with hardware-specific packs (hwpacks). . This package provides a Python library to generate Linaro images and write them to SD cards or image files that you can be boot in QEMU. . It also provides a Python library to aid with the creation of hardware packs. Package: python-linecache2 Version: 1.0.0-21.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 65 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/testing-cabal/linecache2 Priority: optional Section: python Filename: pool/tools/p/python-linecache2/python-linecache2_1.0.0-21.1_all.deb Size: 12326 SHA256: f238f134951db0dffef7dbf7f7924e0787bc4d26b1108a0b0856a03f08ea2cd5 SHA1: 3ddbd328a6dd8c347f20fb534e8f7f4483ce6ebd MD5sum: e55834e45368f8a38b881cc04595a2a7 Description: backports of the linecache module - Python 2.7 A backport of linecache to older supported Pythons. Typically, the user of this module would do "import linecache2 as linecache" and use the linecache module normally. . This package contains the Python 2.7 module. Package: python-multi-key-dict Version: 2.0.3-11.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 44 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/formiaczek/multi_key_dict Priority: optional Section: python Filename: pool/tools/p/python-multi-key-dict/python-multi-key-dict_2.0.3-11.1_all.deb Size: 9662 SHA256: 2bd06fecb49327d4296734e00bb9a994ce37a20b023be5bb7e63e0d8825ff929 SHA1: fc99a99b9e2ea6a17c5ad1490c39729819507f00 MD5sum: b72d026afe42cd3ff731e23c74c586cb Description: multi key dictionary implementation - Python 2.7 Implementation of a multi-key dictionary, i.e.: (key1[,key2, ..]) => value . This dictionary has a similar interface to the standard dictionary, but is extended to support multiple keys referring to the same element. . Multi-key dict provides also extended interface for iterating over items and keys (e.g. by the key type), which might be useful when creating, e.g. dictionaries with index-name key pair allowing to iterate over items using either: names or indexes. It can be useful for many other similar use-cases, and there is no limit to the number of keys used to map to the value. . There are few other useful methods, e.g. to iterate over dictionary (by/using) selected key type, finding other keys mapping to the same value etc. . This package contains the Python 2.7 module. Package: python-netifaces Source: netifaces Version: 0.10.4-0.11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 51 Depends: libc6 (>= 2.4), python (<< 2.8), python (>= 2.7) Provides: python2.7-netifaces Homepage: http://alastairs-place.net/projects/netifaces/ Priority: optional Section: python Filename: pool/tools/n/netifaces/python-netifaces_0.10.4-0.11.1_amd64.deb Size: 16722 SHA256: af9f68539c76d80868d779909e5fe4a94b07d1cc7dcc9c9b611578839f4621d1 SHA1: 4eb2a436cc6663ce4ce7a017f84d0c4dce5ae089 MD5sum: 1d90394961df114f997d12e2edd3c510 Description: portable network interface information - Python 2.x netifaces provides a (hopefully portable-ish) way for Python programmers to get access to a list of the network interfaces on the local machine, and to obtain the addresses of those network interfaces. . This package contains the module for Python 2.x. Python-Version: 2.7 Package: python-netifaces-dbg Source: netifaces Version: 0.10.4-0.11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 85 Depends: libc6 (>= 2.4), python-netifaces (= 0.10.4-0.11.1), python-dbg Homepage: http://alastairs-place.net/projects/netifaces/ Priority: extra Section: debug Filename: pool/tools/n/netifaces/python-netifaces-dbg_0.10.4-0.11.1_amd64.deb Size: 48642 SHA256: 5a5497c71f934516321aea1a83fa7bc3f6d414fb9f7d81fe22e19480b36f78f4 SHA1: 1002ad5363f6dbdbc4bae49240d92f505eaa4adf MD5sum: 05e8ceff94c4f9e26d26ff69b7b9d76b Description: portable network interface information - Python 2.x debug extension netifaces provides a (hopefully portable-ish) way for Python programmers to get access to a list of the network interfaces on the local machine, and to obtain the addresses of those network interfaces. . This package contains debug symbols of python-netifaces. Build-Ids: 5d8de1d730a0a0e65a271c7f3c1b268722cbdd58 Python-Version: 2.7 Package: python-phabricator Version: 0.6.1-112.1 Architecture: all Maintainer: Héctor Orón Martínez Installed-Size: 82 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/disqus/python-phabricator Priority: extra Section: python Filename: pool/tools/p/python-phabricator/python-phabricator_0.6.1-112.1_all.deb Size: 15980 SHA256: 61d237b3090ad38c8b6f073e7a642ef452829eca4beeed515fc4942d4a233568 SHA1: 47f02584d9409e23e2004350b7a965c0646bc168 MD5sum: 0a5c5853f1d49fd2efb59fa42fd2d3b8 Description: Phabricator Python API Bindings (Python 2) Phabricator is an open source collection of web applications which make it easier to write, review, and share source code. . The current package provides Python API bindings for Phabricator interfaces. Package: python-psycopg2 Source: psycopg2 Version: 2.5.4+dfsg-11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 672 Depends: python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~), libc6 (>= 2.14), libpq5 (>= 8.3~) Recommends: python-egenix-mxdatetime Suggests: python-psycopg2-doc Homepage: http://initd.org/projects/psycopg Priority: optional Section: python Filename: pool/tools/p/psycopg2/python-psycopg2_2.5.4+dfsg-11.1_amd64.deb Size: 148574 SHA256: 0aed34a598b939645facc877f435513cdbf7ca5fbe0755d12c92341dad5a1937 SHA1: a46f78a1fc31f38018def4294f8c069a8aadcbfe MD5sum: 60f9d1292cdb7c4ba4cbc4dcda41ded0 Description: Python module for PostgreSQL psycopg is a PostgreSQL database adapter for the Python programming language (just like pygresql and popy.) This is version 2, a complete rewrite of the original code to provide new-style classes for connection and cursor objects and other sweet candies. Like the original, psycopg 2 was written with the aim of being very small and fast, and stable as a rock. . psycopg is different from the other database adapter because it was designed for heavily multi-threaded applications that create and destroy lots of cursors and make a conspicuous number of concurrent INSERTs or UPDATEs. psycopg 2 also provides full asynchronous operations for the really brave programmer. . The main advantages of psycopg2 are that it supports the full Python DBAPI-2.0 and being thread safe at level 2. It also includes some extensions to the standard DBAPI-2.0 to allow for better thread performance. Package: python-psycopg2-dbg Source: psycopg2 Version: 2.5.4+dfsg-11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 1341 Depends: python-psycopg2 (= 2.5.4+dfsg-11.1), python-dbg, libc6 (>= 2.14), libpq5 (>= 8.3~) Homepage: http://initd.org/projects/psycopg Priority: extra Section: debug Filename: pool/tools/p/psycopg2/python-psycopg2-dbg_2.5.4+dfsg-11.1_amd64.deb Size: 244280 SHA256: 15698509fbed668e19fef64a5195b492dcd6581a51ac4a0650a2038ec5fece6a SHA1: c4d27de32f9b794265afdd7d3a4d196732bf5e69 MD5sum: baaa90c5f72f330aea4a8a1b1156cc0a Description: Python module for PostgreSQL (debug extension) psycopg is a PostgreSQL database adapter for the Python programming language (just like pygresql and popy.) This is version 2, a complete rewrite of the original code to provide new-style classes for connection and cursor objects and other sweet candies. Like the original, psycopg 2 was written with the aim of being very small and fast, and stable as a rock. . This package contains the extensions built for the Python debug interpreter. Package: python-psycopg2-doc Source: psycopg2 Version: 2.5.4+dfsg-11.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 1117 Depends: libjs-sphinxdoc (>= 1.0) Suggests: python-psycopg2 | python3-psycopg2 Homepage: http://initd.org/projects/psycopg Priority: optional Section: doc Filename: pool/tools/p/psycopg2/python-psycopg2-doc_2.5.4+dfsg-11.1_all.deb Size: 232520 SHA256: 2a763bb3764cde0d33336a073f0be484d4ec3f4c6a94764ae1c853f65fc33f7e SHA1: 25c8a35c59f3731555a5123f4874967882011592 MD5sum: 23fe28f4b923edf21033b05b6a9d6e79 Description: Python module for PostgreSQL (documentation package) psycopg is a PostgreSQL database adapter for the Python programming language (just like pygresql and popy.) This is version 2, a complete rewrite of the original code to provide new-style classes for connection and cursor objects and other sweet candies. Like the original, psycopg 2 was written with the aim of being very small and fast, and stable as a rock. . psycopg is different from the other database adapter because it was designed for heavily multi-threaded applications that create and destroy lots of cursors and make a conspicuous number of concurrent INSERTs or UPDATEs. psycopg 2 also provides full asynchronous operations for the really brave programmer. . The main advantages of psycopg2 are that it supports the full Python DBAPI-2.0 and being thread safe at level 2. It also includes some extensions to the standard DBAPI-2.0 to allow for better thread performance. . This package contains the psycopg2 documentation Package: python-pygments Source: pygments Version: 2.1.3+dfsg-1~bpo8+11.1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 2844 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Recommends: python-chardet, python-pkg-resources Suggests: ttf-bitstream-vera Homepage: http://pygments.org/ Priority: optional Section: python Filename: pool/tools/p/pygments/python-pygments_2.1.3+dfsg-1~bpo8+11.1_all.deb Size: 532318 SHA256: 9e2347502493d6465411987f386307d7b5deeaade7398e2eb3c9af757661a6f5 SHA1: 2c81fba5eb20387690c4e6e9c9ca5536dd6289b6 MD5sum: 9e7228e21abc0b51b6a9f330a46d080d Description: syntax highlighting package written in Python Pygments aims to be a generic syntax highlighter for general use in all kinds of software such as forum systems, wikis or other applications that need to prettify source code. . Highlights are: * a wide range of common languages and markup formats is supported * special attention is paid to details, increasing quality by a fair amount * support for new languages and formats are added easily * a number of output formats, presently HTML, LaTeX and ANSI sequences * it is usable as a command-line tool and as a library Package: python-pygments-doc Source: pygments Version: 2.1.3+dfsg-1~bpo8+11.1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 1330 Depends: libjs-sphinxdoc (>= 1.0) Recommends: python-pygments Conflicts: python-pygments (<= 2.0~) Homepage: http://pygments.org/ Priority: extra Section: doc Filename: pool/tools/p/pygments/python-pygments-doc_2.1.3+dfsg-1~bpo8+11.1_all.deb Size: 236428 SHA256: 6630743aac6e7204877001557aa16b540e049a1bf242a041f7c357257cfe2df4 SHA1: 8cba0bfa90e9b2e18616cd0f320297a2029b4c5d MD5sum: dfba6003250f4ade556b735fbbba4d58 Description: documentation for the Pygments Pygments is syntax highlighting package. . This package contains the documentation for Pygments in HTML and reStructuredText format. Package: python-sphinx-bootstrap-theme Source: sphinx-bootstrap-theme Version: 0.4.8-11.1 Architecture: all Maintainer: Sandro Tosi Installed-Size: 5414 Depends: python-pkg-resources, python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: http://ryan-roemer.github.io/sphinx-bootstrap-theme/index.html Priority: optional Section: python Filename: pool/tools/s/sphinx-bootstrap-theme/python-sphinx-bootstrap-theme_0.4.8-11.1_all.deb Size: 398532 SHA256: bb7a883e4d389a3fe9324801848f990e34a7b27ee1fc6f1f61cc304edb78801f SHA1: d2df7098d8080199065422fbe48857fadb3b6fbd MD5sum: 4caf3f3f933c86c25c87302fda8eabf9 Description: bootstrap theme for Sphinx This Sphinx theme integrates the Bootstrap CSS / JavaScript framework with various layout options, hierarchical menu navigation, and mobile-friendly responsive design. It is configurable, extensible and can use any number of different Bootswatch CSS themes. Package: python-traceback2 Version: 1.4.0-31.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 81 Depends: python-linecache2, python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://github.com/testing-cabal/traceback2 Priority: optional Section: python Filename: pool/tools/p/python-traceback2/python-traceback2_1.4.0-31.1_all.deb Size: 15988 SHA256: 202c1d304b59627645657d63cc516694b01bc5b5e3f9ba619a82b34289b409ce SHA1: 621ab45083b585f15f4680b1dc4e4b87617d3ab4 MD5sum: a41c7378607a5bec85675cbe15b2bde0 Description: backports of the traceback module - Python 2.7 This package offers a backport of the traceback package to older supported Pythons. Users would typically do: "import traceback2 as traceback" then use the module as if it was the system traceback. . In Python 2.x, unlike traceback, traceback2 creates unicode output (because it depends on the linecache2 module). . This package contains the Python 2.7 module. Package: python-unittest2 Source: unittest2 Version: 1.1.0-6co12.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 467 Depends: python-pkg-resources, python-linecache2, python-six (>= 1.4), python-traceback2, python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: http://pypi.python.org/pypi/unittest2 Priority: optional Section: python Filename: pool/tools/u/unittest2/python-unittest2_1.1.0-6co12.1_all.deb Size: 75812 SHA256: 6771be5be3b681848fb8fcf11c5ad72b80abaa87bfc90bfc8c2a9a4b683a1575 SHA1: 0e276d3d06de754ec5a94783dc655c6da79afd21 MD5sum: 8e52e16d9c165435478724e0d58822f1 Description: backport of the enhanced unittest testing framework - Python 2.7 unittest2 is an enhanced version of unittest including a standard test runner (automatic test discovery), class and module level fixtures (setUpClass / setUpModule etc), many powerful new assert methods, better resource management with addCleanups and a host of other new features. These new features are *all* going into the Python version of unittest in Python 2.7 and Python 3.2. The point of unittest2 is that it works with Python 2.4 - 2.6; you can use it now. . This package contains the Python 2.7 module. Package: python-versiontools Source: versiontools Version: 1.9.1-11.1 Architecture: all Maintainer: Benjamin Drung Installed-Size: 67 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Homepage: https://launchpad.net/versiontools Priority: optional Section: python Filename: pool/tools/v/versiontools/python-versiontools_1.9.1-11.1_all.deb Size: 15428 SHA256: 26ccafd9afd1e8d518b891b6917166fbc63ca9b3bc639fdc9b7aa1f7c2e323fa SHA1: 059cb239d2c2ce098db5f03fefef83030e22e25e MD5sum: 43281174fddadc0fd409ab848d7c44f2 Description: Smart replacement for plain tuple used in __version__ (Python 2) versiontools is a Python module providing a smart replacement for plain tuple used in __version__. It has following features: . * A piece of code that allows you to keep a single version definition inside your package or module. No more hacks in setup.py, no more duplicates in setup.py and somewhere else. Just one version per package. * Version objects can produce nice version strings for released files that are compliant with PEP 386. Releases, alphas, betas, development snaphots. All of those get good version strings out of the box. * Version objects understand the VCS used by your project. Git, Mercurial and Bazaar are supported out of the box. Custom systems can be added by 3rd party plugins. * Version object that compares as a tuple of values and sorts properly. * Zero-dependency install! If all you care about is handling setup() to get nice tarball names then you don’t need to depend on versiontools (no setup_requires, no install_requires!). You will need to bundle a small support module though. . This is the Python 2 version of the package. Package: python3-alabaster Source: alabaster Version: 0.7.8-1~bpo8+11.1 Architecture: all Maintainer: Jeremy T. Bouse Installed-Size: 80 Depends: python3:any (>= 3.3.2-2~) Suggests: python3-sphinx Homepage: https://github.com/bitprophet/alabaster Priority: extra Section: python Filename: pool/tools/a/alabaster/python3-alabaster_0.7.8-1~bpo8+11.1_all.deb Size: 18624 SHA256: ab2ff1c6fa14ad794611960d2cb50afe6e8cb049b2e724444435eef3b2fe66b2 SHA1: 5d555288ea4a93a54460232ab4773f9858301baf MD5sum: 896f94314e0c4c4e494d92cba64987e5 Description: Configurable sidebar-enabled Sphinx theme (Python 3) This theme is a modified "Kr" Sphinx theme from @kennethreitz (especially as used in his Requests project), which was itself originally based on @mitsuhiko's theme used for Flask & related projects. . This is the Python 3 version of the package. Package: python3-argcomplete Source: python-argcomplete Version: 0.8.1-11.1 Architecture: all Maintainer: Marco Nenciarini Installed-Size: 84 Depends: python3:any (>= 3.3.2-2~) Priority: optional Section: python Filename: pool/tools/p/python-argcomplete/python3-argcomplete_0.8.1-11.1_all.deb Size: 19250 SHA256: ff84779bf362868875334ee1b8e96230b8a0432dfbff161f30c10731ddc049e1 SHA1: bcd322d81d33eedcb755d128142ea9de36acbec7 MD5sum: d290cc6714773f66820ada7eeb696827 Description: bash tab completion for argparse (for Python 3) Argcomplete provides easy, extensible command line tab completion of arguments for your Python script. . It makes two assumptions: . * You're using bash as your shell * You're using argparse to manage your command line arguments/options . Argcomplete is particularly useful if your program has lots of options or subparsers, and if your program can dynamically suggest completions for your argument/option values (for example, if the user is browsing resources over the network). . This package provides the module for Python 3.x. Package: python3-contextlib2 Source: contextlib2 Version: 0.5.1-11.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 40 Depends: python3:any (>= 3.3.2-2~) Homepage: http://contextlib2.readthedocs.org/ Priority: optional Section: python Filename: pool/tools/c/contextlib2/python3-contextlib2_0.5.1-11.1_all.deb Size: 10906 SHA256: dc2d69382bd3b4900b6a1ca8c64fc3d15a3b3c59b9e62ead5ef64df9e353befa SHA1: 1ced849532c89fe9712545329e9d9616bdf3cba9 MD5sum: 2611b2859df20a4d5ea3f4b8abad0ba6 Description: Backport and enhancements for the contextlib module - Python 3.x contextlib2 is a backport of the standard library's contextlib module to earlier Python versions. . It also serves as a real world proving ground for possible future enhancements to the standard library version. . This package contains the Python 3.x module. Package: python3-ftdi1 Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 293 Depends: libc6 (>= 2.14), libftdi1-2 (>= 1.3), libusb-1.0-0 (>= 2:1.0.8), python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~) Provides: python3.5-ftdi1 Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: optional Section: python Filename: pool/tools/libf/libftdi1/python3-ftdi1_1.3-21.1_amd64.deb Size: 51694 SHA256: 2231e6471699ff350432140bc2bce44edc1f4851ffd71c336cf30a8e46dbe44f SHA1: f98a7b5333f9479890b418e86db0d0097e80c2e7 MD5sum: b701e452ce3de5893fa6ef87c64fc995 Description: Python module to control and program the FTDI USB controllers This library could talk to FTDI's FT232BM, FT245BM, FT2232C, FT2232D, FT245R, FT232H and FT230X type USB chips from userspace. It uses libusb 1.0 to communicate with the chips. . Functionalities include the possibility to use the chips in standard mode, in bitbang mode, and to read or write the serial EEPROM. . This package provides the ftdi1 module on the Python 3 module path. It is complemented by python-ftdi1. Package: python3-ftdi1-dbgsym Source: libftdi1 Version: 1.3-21.1 Architecture: amd64 Maintainer: Aurelien Jarno Installed-Size: 179 Depends: python3-ftdi1 (= 1.3-21.1) Homepage: http://www.intra2net.com/en/developer/libftdi/ Priority: extra Section: debug Filename: pool/tools/libf/libftdi1/python3-ftdi1-dbgsym_1.3-21.1_amd64.deb Size: 144484 SHA256: 95130f47c33d5b5e97f3830716bc83730fd7200a9a222e665ddac6da2b8e649d SHA1: 223573d765a462131d25ce53c3a050a60f494eb5 MD5sum: 226b5a2255155dcbd2ae7d589d112d61 Description: Debug symbols for python3-ftdi1 Auto-Built-Package: debug-symbols Build-Ids: 36e147a37faa0bc29c97cc2935b50e060a6c6dd8 Package: python3-imagesize Source: python-imagesize Version: 0.7.1-1~bpo8+11.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 24 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/shibukawa/imagesize_py Priority: optional Section: python Filename: pool/tools/p/python-imagesize/python3-imagesize_0.7.1-1~bpo8+11.1_all.deb Size: 4114 SHA256: 4b87cdc98cedc1af08e6ae31997a82c2013674b266e51d5f1f2c8ebfc4bcc2aa SHA1: a3e102a602484d19e9dba3192e11c70299cbc945 MD5sum: 8145193134fc4c6a13ef78a632b18140 Description: Python 3 module for getting image size from png/jpeg/jpeg2000/gif file This small module parses image header and returns width and height of the image. Supported formats are: PNG/JPEG/JPEG2000/GIF. . This is the Python 3 version of the module. Package: python3-jenkins Source: python-jenkins Version: 0.4.11-11.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 83 Depends: python3-multi-key-dict, python3-pbr (>= 0.8.2), python3-six (>= 1.3.0), python3:any (>= 3.3.2-2~) Homepage: http://launchpad.net/python-jenkins Priority: optional Section: python Filename: pool/tools/p/python-jenkins/python3-jenkins_0.4.11-11.1_all.deb Size: 17494 SHA256: 6b5ad785ffc4e983914bb8bb369a4ec7ab8c7b7d099aa3b64ad288c42943dfdf SHA1: b0848d00a0aed0ccb53ba139376abe368ea3e13d MD5sum: 159519fb0b16a1fa4468031e45cc3df1 Description: bindings for the Jenkins Remote API - Python 3.x This package provides Python bindings for the Jenkins Remote API. It current supports management of: . * Project configuration * Build control * Slave node configuration . This package contains the Python 3.x module. Package: python3-jenkins-job-builder Source: jenkins-job-builder Version: 2.0.0~b2-2stretch.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1011 Depends: python3-jenkins, python3-pbr, python3-pkg-resources, python3-six (>= 1.9.0), python3-stevedore, python3-yaml, python3:any (>= 3.3.2-2~) Homepage: http://ci.openstack.org/jenkins-job-builder Priority: optional Section: python Filename: pool/tools/j/jenkins-job-builder/python3-jenkins-job-builder_2.0.0~b2-2stretch.1_all.deb Size: 173328 SHA256: 31ebfc2c057b520faf813ee56d74e535b01b0f43917397ca62828f08240d9c31 SHA1: f52a7b6d4fba45c7156e23ab1c7c390ca557257e MD5sum: eb4debbbf4ab61689c959618be87d4f7 Description: Configure Jenkins using YAML files - Python 3.x Jenkins Job Builder takes simple descriptions of Jenkins jobs in YAML format and uses them to configure Jenkins. You can keep your job descriptions in human readable text format in a version control system to make changes and auditing easier. It also has a flexible template system, so creating many similarly configured jobs is easy. . This package contains the Python 3.x module. Package: python3-linecache2 Source: python-linecache2 Version: 1.0.0-21.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 65 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/testing-cabal/linecache2 Priority: optional Section: python Filename: pool/tools/p/python-linecache2/python3-linecache2_1.0.0-21.1_all.deb Size: 12410 SHA256: c86ad5f0653b80a659612ef4776703c8bc8ff639928c6ffe8f7cdea508fdc7af SHA1: 9d7e565f157b839c1507c5c04f1a6b1b8c19accf MD5sum: fe2620dcfedd50ce5094fde61caa24e2 Description: backports of the linecache module - Python 3.x A backport of linecache to older supported Pythons. Typically, the user of this module would do "import linecache2 as linecache" and use the linecache module normally. . This package contains the Python 3.x module. Package: python3-multi-key-dict Source: python-multi-key-dict Version: 2.0.3-11.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 44 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/formiaczek/multi_key_dict Priority: optional Section: python Filename: pool/tools/p/python-multi-key-dict/python3-multi-key-dict_2.0.3-11.1_all.deb Size: 9740 SHA256: 140709b3e2a4e2357f31aea4e57da5864b95b9502b752d0d6f772e02f60a6576 SHA1: 5d86f8d1b0b7675c27f8182994f298a2e5a1d475 MD5sum: 3f85f97bf8634ee0b30560038dc1cde7 Description: Multi key dictionary implementation - Python 3.x Implementation of a multi-key dictionary, i.e.: (key1[,key2, ..]) => value . This dictionary has a similar interface to the standard dictionary, but is extended to support multiple keys referring to the same element. . Multi-key dict provides also extended interface for iterating over items and keys (e.g. by the key type), which might be useful when creating, e.g. dictionaries with index-name key pair allowing to iterate over items using either: names or indexes. It can be useful for many other similar use-cases, and there is no limit to the number of keys used to map to the value. . There are few other useful methods, e.g. to iterate over dictionary (by/using) selected key type, finding other keys mapping to the same value etc. . This package contains the Python 3.x module. Package: python3-netifaces Source: netifaces Version: 0.10.4-0.11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 47 Depends: libc6 (>= 2.4), python3 (<< 3.6), python3 (>= 3.5~) Homepage: http://alastairs-place.net/projects/netifaces/ Priority: optional Section: python Filename: pool/tools/n/netifaces/python3-netifaces_0.10.4-0.11.1_amd64.deb Size: 12918 SHA256: d0b453e6720432b7b14ed071f254c0d174fd4357ea54ec5a96c41fae45fb873f SHA1: c78b2812c8e253923f5f9bcfcf1bd54d036a87dd MD5sum: 1186da1dc4fd8122ce57569b289738f7 Description: portable network interface information - Python 3.x netifaces provides a (hopefully portable-ish) way for Python programmers to get access to a list of the network interfaces on the local machine, and to obtain the addresses of those network interfaces. . This package contains the module for Python 3.x. Package: python3-netifaces-dbg Source: netifaces Version: 0.10.4-0.11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 90 Depends: libc6 (>= 2.4), python3-netifaces (= 0.10.4-0.11.1), python3-dbg Homepage: http://alastairs-place.net/projects/netifaces/ Priority: extra Section: debug Filename: pool/tools/n/netifaces/python3-netifaces-dbg_0.10.4-0.11.1_amd64.deb Size: 52512 SHA256: 86621ab738c7d7784211e014a5df59e97a04a0ed45eea0f5b364860ff0f44d5c SHA1: fab0b67e08779dd6bab85c20a7ae460c4718c92c MD5sum: e0d0fa60418304796bf35ca01411d470 Description: portable network interface information - Python 3.x debug extension netifaces provides a (hopefully portable-ish) way for Python programmers to get access to a list of the network interfaces on the local machine, and to obtain the addresses of those network interfaces. . This package contains debug symbols of python3-netifaces. Build-Ids: 13cbe7477765ea5068b66ccdd6f284b6f5ac98ca Package: python3-phabricator Source: python-phabricator Version: 0.6.1-112.1 Architecture: all Maintainer: Héctor Orón Martínez Installed-Size: 82 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/disqus/python-phabricator Priority: extra Section: python Filename: pool/tools/p/python-phabricator/python3-phabricator_0.6.1-112.1_all.deb Size: 16054 SHA256: 4cfa58125dc2e692c02b877c002639754d76f07be1e969448a377b371daf8a99 SHA1: d1a6a6675229d37dd8ba026171dd396f461bdc37 MD5sum: c7a51c503a431c68744908dbb5bed174 Description: Phabricator Python API Bindings (Python 3) Phabricator is an open source collection of web applications which make it easier to write, review, and share source code. . The current package provides Python API bindings for Phabricator interfaces. Package: python3-psycopg2 Source: psycopg2 Version: 2.5.4+dfsg-11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 649 Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libpq5 (>= 8.3~) Suggests: python-psycopg2-doc Provides: python3.5-psycopg2 Homepage: http://initd.org/projects/psycopg Priority: optional Section: python Filename: pool/tools/p/psycopg2/python3-psycopg2_2.5.4+dfsg-11.1_amd64.deb Size: 132428 SHA256: 01bdfe983bc7407e2bf92b76a9260c32c18e6b3c13df7dbb798534729315e1fd SHA1: 504c37b21d729680469022d00d283f31a0d46b41 MD5sum: 41964df0009fdc8af4a6bd598f324f74 Description: Python 3 module for PostgreSQL psycopg is a PostgreSQL database adapter for the Python3 programming language (just like pygresql and popy.) This is version 2, a complete rewrite of the original code to provide new-style classes for connection and cursor objects and other sweet candies. Like the original, psycopg 2 was written with the aim of being very small and fast, and stable as a rock. . psycopg is different from the other database adapter because it was designed for heavily multi-threaded applications that create and destroy lots of cursors and make a conspicuous number of concurrent INSERTs or UPDATEs. psycopg 2 also provides full asynchronous operations for the really brave programmer. . The main advantages of psycopg2 are that it supports the full Python DBAPI-2.0 and being thread safe at level 2. It also includes some extensions to the standard DBAPI-2.0 to allow for better thread performance. Package: python3-psycopg2-dbg Source: psycopg2 Version: 2.5.4+dfsg-11.1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 1635 Depends: python3-psycopg2 (= 2.5.4+dfsg-11.1), python3-dbg, libc6 (>= 2.14), libpq5 (>= 8.3~) Homepage: http://initd.org/projects/psycopg Priority: extra Section: debug Filename: pool/tools/p/psycopg2/python3-psycopg2-dbg_2.5.4+dfsg-11.1_amd64.deb Size: 302178 SHA256: 6524cedfa20d21c14664b4fd8246685005f494bfdddbc74e8ce37d71f364e45a SHA1: a7fb14b3361806e21299f6a17214efc687e1d6eb MD5sum: 42ba0ef6e7253b35b9803cb7fceb01fb Description: Python 3 module for PostgreSQL (debug extension) psycopg is a PostgreSQL database adapter for the Python3 programming language (just like pygresql and popy.) This is version 2, a complete rewrite of the original code to provide new-style classes for connection and cursor objects and other sweet candies. Like the original, psycopg 2 was written with the aim of being very small and fast, and stable as a rock. . This package contains the extensions built for the Python debug interpreter. Package: python3-pygments Source: pygments Version: 2.1.3+dfsg-1~bpo8+11.1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 2832 Depends: python3:any (>= 3.3.2-2~) Recommends: python3-pkg-resources Suggests: ttf-bitstream-vera Homepage: http://pygments.org/ Priority: optional Section: python Filename: pool/tools/p/pygments/python3-pygments_2.1.3+dfsg-1~bpo8+11.1_all.deb Size: 530038 SHA256: bada4d271b0e6dd5bdb86b17fe5065115e40b6f0891cb924d263a7b1cce65353 SHA1: 4afb47953b1a7f6ac2131aa4954a4b458df0218d MD5sum: 15391cc80c388874dad071ce59b1500e Description: syntax highlighting package written in Python 3 Pygments aims to be a generic syntax highlighter for general use in all kinds of software such as forum systems, wikis or other applications that need to prettify source code. . Highlights are: * a wide range of common languages and markup formats is supported * special attention is paid to details, increasing quality by a fair amount * support for new languages and formats are added easily * a number of output formats, presently HTML, LaTeX and ANSI sequences * it is usable as a command-line tool and as a library Package: python3-sphinx-bootstrap-theme Source: sphinx-bootstrap-theme Version: 0.4.8-11.1 Architecture: all Maintainer: Sandro Tosi Installed-Size: 5410 Depends: python3-pkg-resources, python3:any (>= 3.3.2-2~) Homepage: http://ryan-roemer.github.io/sphinx-bootstrap-theme/index.html Priority: optional Section: python Filename: pool/tools/s/sphinx-bootstrap-theme/python3-sphinx-bootstrap-theme_0.4.8-11.1_all.deb Size: 394500 SHA256: a561838fd91b95600ff573d60a0ef4ab2e01ccef221712bf43db072114878f78 SHA1: 9a9eeabf280997af6b710a28e6c7692ec1be5686 MD5sum: d336bbc64a971f5dfbe03d5053264034 Description: bootstrap theme for Sphinx (Python 3) This Sphinx theme integrates the Bootstrap CSS / JavaScript framework with various layout options, hierarchical menu navigation, and mobile-friendly responsive design. It is configurable, extensible and can use any number of different Bootswatch CSS themes. . This package contains the Python 3 version of sphinx-bootstrap-theme Package: python3-traceback2 Source: python-traceback2 Version: 1.4.0-31.1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 81 Depends: python3-linecache2, python3:any (>= 3.3.2-2~) Homepage: https://github.com/testing-cabal/traceback2 Priority: optional Section: python Filename: pool/tools/p/python-traceback2/python3-traceback2_1.4.0-31.1_all.deb Size: 16074 SHA256: b07ee29158e69cc2dd63fa49d8852bb2d4367a0aa57daa2784f9bc519d12fca4 SHA1: 2638216d3733e9e4e958388b639bef31dde4b700 MD5sum: d5eee19f4f97473745a6b55c5a4083f0 Description: backports of the traceback module - Python 3.x This package offers a backport of the traceback package to older supported Pythons. Users would typically do: "import traceback2 as traceback" then use the module as if it was the system traceback. . In Python 2.x, unlike traceback, traceback2 creates unicode output (because it depends on the linecache2 module). . This package contains the Python 3.x module. Package: python3-unittest2 Source: unittest2 Version: 1.1.0-6co12.1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 458 Depends: python3-pkg-resources, python3-linecache2, python3-six (>= 1.4), python3-traceback2, python3:any (>= 3.3.2-2~) Homepage: http://pypi.python.org/pypi/unittest2 Priority: optional Section: python Filename: pool/tools/u/unittest2/python3-unittest2_1.1.0-6co12.1_all.deb Size: 69578 SHA256: 5b5e3bf7e19b33a701c6b48e870bdcb6464e3809c0aeaa8d6029c3187b2426e4 SHA1: 2053c67b24c6dee11ba7aaf7604aa3ffbd1c3100 MD5sum: ff95662c1df9c884b67b907e2a688e3f Description: backport of the enhanced unittest testing framework - Python 3.x unittest2 is an enhanced version of unittest including a standard test runner (automatic test discovery), class and module level fixtures (setUpClass / setUpModule etc), many powerful new assert methods, better resource management with addCleanups and a host of other new features. These new features are *all* going into the Python version of unittest in Python 2.7 and Python 3.2. The point of unittest2 is that it works with Python 2.4 - 2.6; you can use it now. . This package contains the Python 3.x module. Package: python3-versiontools Source: versiontools Version: 1.9.1-11.1 Architecture: all Maintainer: Benjamin Drung Installed-Size: 67 Depends: python3:any (>= 3.3.2-2~) Homepage: https://launchpad.net/versiontools Priority: optional Section: python Filename: pool/tools/v/versiontools/python3-versiontools_1.9.1-11.1_all.deb Size: 15516 SHA256: f0fde21201dff5267be47fba60dbf8d650cab8eb32deed5f2bef0a5f4abe1663 SHA1: 1566bb689e1c0e912760dc7796c1232665d3a92f MD5sum: 9b1f8592018320932ef195c22281ae0f Description: Smart replacement for plain tuple used in __version__ (Python 3) versiontools is a Python module providing a smart replacement for plain tuple used in __version__. It has following features: . * A piece of code that allows you to keep a single version definition inside your package or module. No more hacks in setup.py, no more duplicates in setup.py and somewhere else. Just one version per package. * Version objects can produce nice version strings for released files that are compliant with PEP 386. Releases, alphas, betas, development snaphots. All of those get good version strings out of the box. * Version objects understand the VCS used by your project. Git, Mercurial and Bazaar are supported out of the box. Custom systems can be added by 3rd party plugins. * Version object that compares as a tuple of values and sorts properly. * Zero-dependency install! If all you care about is handling setup() to get nice tarball names then you don’t need to depend on versiontools (no setup_requires, no install_requires!). You will need to bundle a small support module though. . This is the Python 3 version of the package. Package: reprepro Version: 4.17.1-1co11.1 Architecture: amd64 Maintainer: Bernhard R. Link Installed-Size: 1135 Depends: pinentry-curses, libarchive13 (>= 3.0.4), libbz2-1.0, libc6 (>= 2.15), libdb5.3, libgpg-error0 (>= 1.14), libgpgme11 (>= 1.2.0), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.0.2) Recommends: apt (>= 0.9.4) Suggests: gnupg-agent, inoticoming, lzip (>= 1.11-2) Homepage: http://mirrorer.alioth.debian.org/ Priority: extra Section: utils Filename: pool/tools/r/reprepro/reprepro_4.17.1-1co11.1_amd64.deb Size: 452436 SHA256: 7c013835fd777ae09e112c3576376ba5ffc018c308d233db117cf82b0e881708 SHA1: fe15b75d8d4a08fdd2b94126ff608a968f6728a0 MD5sum: a5177440c485f35452363523bce1b569 Description: Debian package repository producer reprepro is a tool to manage a repository of Debian packages (.deb, .udeb, .dsc, ...). It stores files either being injected manually or downloaded from some other repository (partially) mirrored into one pool/ hierarchy. Managed packages and files are stored in a Berkeley DB, so no database server is needed. Checking signatures of mirrored repositories and creating signatures of the generated Package indices is supported. . This package also contains the changestool and rredtool helpers. Package: reprepro-dbgsym Source: reprepro Version: 4.17.1-1co11.1 Architecture: amd64 Maintainer: Bernhard R. Link Installed-Size: 1096 Depends: reprepro (= 4.17.1-1co11.1) Homepage: http://mirrorer.alioth.debian.org/ Priority: extra Section: debug Filename: pool/tools/r/reprepro/reprepro-dbgsym_4.17.1-1co11.1_amd64.deb Size: 1004284 SHA256: afe0cf40e80dd82878d7c28cd38e84a7ae3c94d6ae17c8ff60d91bea7236372c SHA1: cd205d983a9eca52cd6e52b20a830b6bde5fe637 MD5sum: 63ea22e19f6b228804d1a906bbbc1a2c Description: Debug symbols for reprepro Auto-Built-Package: debug-symbols Build-Ids: 8f35eeea5a8f5b82b729ac3517b17950e6cffe70 c07aad653639e90e631b648bc797d408058b0d34 fe2b79f88cac97c294a943b52cce7ffa365f5055 Package: ruby-daemons Version: 1.1.5-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 109 Depends: ruby1.8 | ruby-interpreter Breaks: libdaemons-ruby (<< 1.1.3-1~), libdaemons-ruby1.8 (<< 1.1.3-1~) Replaces: libdaemons-ruby (<< 1.1.3-1~), libdaemons-ruby1.8 (<< 1.1.3-1~) Provides: libdaemons-ruby, libdaemons-ruby1.8 Homepage: http://daemons.rubyforge.org Priority: optional Section: ruby Filename: pool/tools/r/ruby-daemons/ruby-daemons_1.1.5-21.1_all.deb Size: 22254 SHA256: d31fe763947f6c0e6f94f7a7174bf6e259439d74b5811f84ff16170643185b99 SHA1: c15c341ae65641e1586b32cb83092a579ed44759 MD5sum: a05dbf5e47eaac02810a9eb7fd29d774 Description: Ruby daemons library Daemons provides an easy way to wrap existing ruby scripts (for example a self-written server) to be run as a daemon and to be controlled by simple start/stop/restart commands. daemons can also run and control blocks of Ruby code in a daemon process. Ruby-Versions: all Package: ruby-erubis Version: 2.7.0-21.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 1195 Depends: ruby | ruby-interpreter Breaks: erubis (<< 2.7.0-1~), erubis-doc (<< 2.7.0-1~), liberubis-ruby (<< 2.7.0-1~), liberubis-ruby1.8 (<< 2.7.0-1~), liberubis-ruby1.9.1 (<< 2.7.0-1~) Replaces: erubis (<< 2.7.0-1~), erubis-doc (<< 2.7.0-1~), liberubis-ruby (<< 2.7.0-1~), liberubis-ruby1.8 (<< 2.7.0-1~), liberubis-ruby1.9.1 (<< 2.7.0-1~) Provides: erubis, erubis-doc, liberubis-ruby, liberubis-ruby1.8, liberubis-ruby1.9.1 Homepage: http://www.kuwata-lab.com/erubis/ Priority: optional Section: ruby Filename: pool/tools/r/ruby-erubis/ruby-erubis_2.7.0-21.1_all.deb Size: 94912 SHA256: 03b0912e75c45e2e10ca8920bcfd3857e99ada4b996340c3a1c2fda208288566 SHA1: 51304ad8646b6b90fbe7a61344846c199eea5ddd MD5sum: 45c6653100ffe3a4473a1375ffc3e6aa Description: fast and extensible eRuby implementation which supports multi-language Erubis is a very fast eRuby implementation that features: * Multi-language support (Ruby/PHP/C/Java/Scheme/Perl/Javascript) * Auto escaping support * Auto trimming spaces around '<% %>' * Embedded pattern changeable (default '<% %>') * Enable to handle Processing Instructions (PI) as embedded pattern * Context object available and easy to combine eRuby template with YAML file * Print statement available * Easy to extend and customize in subclass * Ruby on Rails support Ruby-Versions: all Package: ruby-rails-xss Version: 0.4.0-11.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 28 Depends: ruby | ruby-interpreter Homepage: http://github.com/joloudov/rails_xss Priority: optional Section: ruby Filename: pool/tools/r/ruby-rails-xss/ruby-rails-xss_0.4.0-11.1_all.deb Size: 4834 SHA256: 2ed938f06403914e41815a01d427a182d050459fab2aea39f13dea8a4ba74e3c SHA1: 3390ad3b98cc23ddd88b59b9b2e89be5331fed35 MD5sum: 08eff8272607853c92bf29e58b7b0bc7 Description: A plugin for rails 2.3 apps which switches the default to escape by default This plugin replaces the default ERB template handlers with erubis, and switches the behaviour to escape by default rather than requiring you to escape. This is consistent with the behaviour in Rails 3.0. Ruby-Versions: all Package: ruby-rdoc Version: 4.0.1-11.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 1445 Depends: ruby | ruby-interpreter Homepage: http://docs.seattlerb.org/rdoc Priority: optional Section: ruby Filename: pool/tools/r/ruby-rdoc/ruby-rdoc_4.0.1-11.1_all.deb Size: 247440 SHA256: 5f6408cace1c71b37a4f297145eb5f25a64524c01a601baacf64c74523d34597 SHA1: 641a48fc0310b6fc45f128600a56016ccae591e0 MD5sum: 72f0744ef98ad7ed9d9d33eb0bc21c08 Description: RDoc produces HTML and command-line documentation for Ruby projects RDoc produces HTML and command-line documentation for Ruby projects. RDoc includes the +rdoc+ and +ri+ tools for generating and displaying documentation from the command-line. Ruby-Versions: all Package: rubygems-integration Version: 1.11.1 Architecture: all Maintainer: Debian Ruby Extras Maintainers Installed-Size: 24 Depends: ruby | ruby-interpreter Suggests: rubygems, bundler Priority: optional Section: ruby Filename: pool/tools/r/rubygems-integration/rubygems-integration_1.11.1_all.deb Size: 4746 SHA256: b2f36e5bb7ac9ca953c404acf571a84a2cbbe24d207cf33682b78db906dd9c4e SHA1: ae7952d127bb5deaeb2ccab14429e92229e85714 MD5sum: de733ddd6c11e6f919bb4b4465dc1388 Description: integrates Debian Ruby packages with Rubygems rubygems-integration makes Debian Ruby packages recognizable by Rubygems. Debian Ruby packages may be used to satisfy Rubygems dependencies both with plain Rubygems and with Bundler. This also allows one to use Debian Ruby packages to satisfy dependencies in Rails 3 applications. Package: servod-tools Version: 20180201-1stretch.1 Architecture: all Maintainer: Guillaume Tucker Installed-Size: 25 Depends: python-hdctools-servo, python-pyudev (>= 0.21.0), python:any Homepage: https://gitlab.collabora.com/gtucker/servod-tools.git Priority: optional Section: admin Filename: pool/tools/s/servod-tools/servod-tools_20180201-1stretch.1_all.deb Size: 5010 SHA256: 9a9e804c2347e6043c8ea23cb0538799ef9a04f2bf086066264a69014f30b18a SHA1: e20d857c00e44f88096e279af5964b81fba4c28c MD5sum: 5aebf8a059cba9292ff26007721d30f3 Description: Handy tools to connect to multiple servo boards This package contains a wrapper script to start servod automatically as a systemd service using udev rules when a servo board is connected.